Pro Event IBeam - DJ Equipment American DJ - Free user manual and instructions
Find the device manual for free Pro Event IBeam American DJ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Moving Head Beam Light |
| Brand | American DJ |
| Model | Pro Event IBeam |
| Light Source | 60W LED |
| Beam Angle | 3 degrees |
| Dimensions (L x W x H) | 10.5 x 8.3 x 12.2 inches (267 x 211 x 310 mm) |
| Weight | 15.4 lbs (7 kg) |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 60W (max) |
| Control Modes | DMX (9 channels), Sound Active, Master/Slave, Auto |
| DMX Connectors | 3-pin XLR in/out |
| Movement Range | Pan: 540°, Tilt: 270° |
| Colors | 14 dichroic colors + white |
| Gobos | 14 static gobos + open |
| Strobe | Variable speed, 0-20 Hz |
| Dimmer | Linear 0-100% |
| Cooling | Fan cooled |
| Housing | ABS plastic, black |
| Mounting | Omega bracket with safety cable loop |
| Safety | Use safety cable; mount securely; avoid moisture |
| Maintenance | Clean lens with soft dry cloth; check ventilation |
| Spare Parts | LED module, power supply, main board, fans |
| Repairability | Replaceable parts; consult manual for instructions |
Frequently Asked Questions - Pro Event IBeam American DJ
How do I set up DMX control on the Pro Event IBeam?
Connect a DMX controller to the 3-pin XLR input. Set the fixture's DMX address using the menu on the rear panel. The default DMX channel mode is 9 channels.
Can I use the light in sound-active mode?
Yes, select 'Sound Active' mode from the menu. The built-in microphone will trigger light patterns based on ambient music.
What is the recommended mounting method?
Mount the fixture using the included omega bracket on a truss or stand. Always attach a safety cable to the secondary loop for additional security.
How do I clean the lens and fixture?
Use a soft, dry cloth to gently wipe the lens and housing. Avoid harsh chemicals; for stubborn dirt, slightly dampen the cloth with water.
What should I do if the light stops working?
First, check power connections and fuse. Ensure the fixture is receiving correct voltage. If still not working, consult the manual for troubleshooting or contact support.
Is the LED bulb replaceable?
The LED module is not user-replaceable. If it fails, contact American DJ or an authorized service center for replacement.
What DMX channels are available?
The Pro Event IBeam uses 9 DMX channels: 1-Pan, 2-Tilt, 3-Pan/Tilt Speed, 4-Color, 5-Gobo, 6-Shutter/Strobe, 7-Dimmer, 8-Prism, 9-Focus.
Can I run multiple units in master/slave mode?
Yes, set one unit as 'Master' and the others as 'Slave' using the menu. Connect them via DMX cables. The slaves will follow the master's patterns.
What is the beam angle and how far can it project?
The beam angle is 3 degrees, providing a tight, intense beam. It can project effectively up to 40-50 feet (12-15 meters) depending on ambient light.
How do I update the firmware?
Firmware updates are available via the American DJ website. Use a USB cable and a computer with the update tool (if applicable) or contact support for instructions.
User questions about Pro Event IBeam American DJ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your DJ Equipment in PDF format for free! Find your manual Pro Event IBeam - American DJ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Pro Event IBeam by American DJ.
USER MANUAL Pro Event IBeam American DJ
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : American DJ
Model : Pro Event IBeam
Category : DJ Equipment