X500i - Projector BENQ - Free user manual and instructions
Find the device manual for free X500i BENQ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Projector |
| Brand | BenQ |
| Model | X500i |
| Resolution | 4K UHD (3840 x 2160) |
| Brightness | 3200 ANSI Lumens |
| Light Source | Lamp |
| Lamp Life | Up to 4000 hours (Normal mode) |
| Aspect Ratio | 16:9 |
| Contrast Ratio | 10000:1 |
| Keystone Correction | Vertical ±40 degrees |
| Projection Size | 60" to 300" |
| Throw Ratio | 1.15 - 1.9 |
| Built-in Speakers | 10W x 2 |
| Connectivity | HDMI x2, USB-A, Audio Out, RS232 |
| Dimensions (W x D x H) | 416 x 135 x 332 mm |
| Weight | 4.2 kg |
| Power Consumption | 310W (Normal mode) |
| Main Features | 4K UHD, HDR10, HLG, SmartEco mode |
| Maintenance | Lamp replacement, filter cleaning |
| Safety | Automatic power off, security bar |
| Spare Parts | Lamp module, filter |
Frequently Asked Questions - X500i BENQ
How do I connect my laptop to the X500i projector?
Use an HDMI cable to connect your laptop's HDMI output to one of the projector's HDMI ports. Ensure the projector is set to the correct input source by pressing the Source button on the remote or control panel.
What is the lamp life of the BenQ X500i?
The lamp life is up to 4000 hours in Normal mode and up to 10000 hours in SmartEco mode. Actual lifespan depends on usage conditions.
How do I adjust the keystone correction on the X500i?
Press the Keystone button on the remote or go to the on-screen menu under Display > Keystone. Use the arrow keys to adjust vertical keystone up to ±40 degrees.
Can the X500i project 3D content?
Yes, the X500i supports 3D projection via HDMI. You need to use compatible 3D glasses and a 3D source. Enable 3D in the menu under 3D Settings.
How do I clean the air filter on the X500i?
Turn off the projector and unplug it. Open the filter cover on the side, remove the filter, and clean it with a soft brush or vacuum cleaner. Reinstall the filter and close the cover. Clean every 500 hours of use.
What is the throw distance for a 100-inch screen?
For a 100-inch screen, the throw distance is approximately 2.5 to 4.2 meters depending on zoom. Use the projector's zoom lens to adjust within that range.
Does the X500i have Bluetooth connectivity?
No, the X500i does not have built-in Bluetooth. However, you can connect external Bluetooth adapters via USB or audio out for wireless audio transmission.
How do I reset the projector to factory settings?
Go to the on-screen menu, navigate to System Setup > Reset, and select Factory Reset. Confirm the action. All settings will be restored to defaults.
What is the warranty period for the BenQ X500i?
BenQ typically offers a 3-year warranty for projectors, but it may vary by region. Check your purchase documentation or contact BenQ support for exact terms.
How do I replace the lamp in the X500i?
Turn off and unplug the projector. Wait for it to cool down. Remove the lamp cover screw, open the cover, release the lamp module by loosening the screw, and pull it out. Insert a new lamp module (part number: 5J.JDN25.001), tighten the screw, and close the cover. Reset the lamp timer via the menu.
User questions about X500i BENQ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual X500i - BENQ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. X500i by BENQ.
USER MANUAL X500i BENQ
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BENQ
Model : X500i
Category : Projector