EKI-2526M-AE - Switch Advantech - Free user manual and instructions
Find the device manual for free EKI-2526M-AE Advantech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Unmanaged Ethernet Switch |
| Model Number | EKI-2526M-AE |
| Brand | Advantech |
| Number of Ports | 26 (24 x 10/100Base-TX, 2 x Combo SFP/RJ45 Gigabit) |
| Dimensions (W x D x H) | 440 x 200 x 44 mm (1U rack-mount) |
| Weight | 2.5 kg |
| Power Input | 12-48 VDC or 100-240 VAC via included adapter |
| Power Consumption | 12 W max |
| Operating Temperature | -10°C to 60°C |
| Storage Temperature | -40°C to 85°C |
| Humidity | 5% to 95% non-condensing |
| Switching Capacity | 8.8 Gbps |
| MAC Address Table Size | 8K entries |
| Housing | Metal, IP30 rated |
| Mounting | Rack mount (brackets included) or DIN-rail kit (optional) |
| LED Indicators | Power, port link/activity, speed |
| Warranty | 5 years from Advantech |
| Included Accessories | Power adapter, rack mount brackets, quick start guide |
| Maintenance | Clean with dry cloth; avoid liquids. Do not disassemble. |
| Safety Precautions | Use only supplied power adapter. Avoid moisture. Disconnect power before cleaning. |
| Spare Parts and Repairability | No user-replaceable parts. Contact Advantech support for repairs. |
Frequently Asked Questions - EKI-2526M-AE Advantech
How do I power on the Advantech EKI-2526M-AE switch?
Connect the included power adapter to the DC input port on the switch, then plug it into a wall outlet. The Power LED will illuminate green to indicate normal operation.
What cables should I use for connecting devices?
Use standard Cat5e or Cat6 Ethernet cables with RJ45 connectors for copper ports. For fiber SFP slots, use compatible SFP modules and fiber patch cables (LC connector).
Does this switch support PoE?
No, the EKI-2526M-AE is an unmanaged switch and does not provide PoE. All ports are data-only.
Can I mount the switch on a DIN rail?
Yes, the switch supports DIN-rail mounting using an optional kit (sold separately). Alternatively, rack mount brackets are included for 19-inch rack installation.
How do I connect fiber optic cables?
Insert a compatible SFP module into one of the two combo SFP slots until it clicks. Then connect the LC fiber connector to the module. The corresponding RJ45 port will be disabled when the SFP slot is used.
What do the LED indicators mean?
- PWR: Solid green = power on; Off = no power.
- Link/Act: Solid green = link established; Blinking = activity.
- Speed: Green = 100 Mbps; Off = 10 Mbps. For fiber ports, check module documentation.
- Link/Act: Solid green = link established; Blinking = activity.
- Speed: Green = 100 Mbps; Off = 10 Mbps. For fiber ports, check module documentation.
How to clean the switch?
Disconnect power and use a soft, dry cloth to wipe the exterior. Do not use liquids or abrasive cleaners. Avoid cleaning near open ports.
What is the maximum cable length?
For copper ports, the maximum cable length is 100 meters (328 ft) using Cat5e or better cable. For fiber, length depends on the SFP module (e.g., multi-mode up to 550m, single-mode up to 10km).
Is the switch fanless?
Yes, the EKI-2526M-AE features a fanless design for silent operation and reduced maintenance. Ensure proper ventilation to avoid overheating.
How do I reset the switch to factory defaults?
As an unmanaged switch, the EKI-2526M-AE has no configurable settings. Simply power cycle the device to reset all internal states.
User questions about EKI-2526M-AE Advantech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual EKI-2526M-AE - Advantech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EKI-2526M-AE by Advantech.