Sub 37 - Synthesizer Moog - Free user manual and instructions
Find the device manual for free Sub 37 Moog in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Analog Synthesizer |
| Keyboard | 37 keys (velocity-sensitive, aftertouch) |
| Dimensions | 560 x 300 x 140 mm (approx.) |
| Weight | 6.5 kg (approx.) |
| Power Supply | 12V DC, 1A (adapter included) |
| Oscillators | 2 analog VCOs with waveforms saw, square, triangle, sine |
| Filter | Moog Ladder Filter (low-pass, 4-pole) |
| Envelopes | 2 ADSR envelopes (one dedicated to filter) |
| LFO | 1 LFO with multiple waveforms and destinations |
| Sequencer | Step sequencer with up to 256 steps, song mode |
| Arpeggiator | Built-in arpeggiator with various modes |
| Effects | Analog distortion, digital delay (BBD emulation) |
| Patch Memory | 16 preset patches (rewritable) |
| Connectivity | MIDI In/Out/Thru, USB-MIDI, CV/Gate, audio in/out, headphone |
| Display | OLED screen with parameter names |
| Controls | Knobs, switches, pitch/mod wheels, ribbon controller |
| Maintenance & Cleaning | Clean with a soft dry cloth; avoid liquids and solvents |
| Safety | Use only supplied power adapter; do not expose to moisture |
| Repairability | Contact Moog or authorized service center |
| Warranty | 2 years limited warranty (varies by region) |
Frequently Asked Questions - Sub 37 Moog
How do I save a patch on the Sub 37?
To save a patch, press the SAVE button, then use the data knob to select a location (1-16), and press SAVE again.
Can I use the Sub 37 without a computer?
Yes, it is a standalone synthesizer. You can play it via its keyboard or control it with external MIDI/CV devices.
How do I restore factory presets?
Hold the PANEL button while powering on until 'RESET' appears on the display. Confirm with SAVE.
What type of power adapter does the Sub 37 use?
It uses a 12V DC, center-positive adapter with at least 1A current. A compatible adapter is included with the unit.
Is the Sub 37 polyphonic?
No, it is a paraphonic synthesizer. It has two oscillators but only one filter and one amplifier envelope, allowing two-note paraphony.
How do I connect external audio to the Sub 37?
Use the EXT AUDIO INPUT jack on the rear panel. The external signal is routed through the filter and can be mixed with the internal sound.
What is the ribbon controller used for?
The ribbon controller can be assigned to various parameters like pitch bend, filter cutoff, or modulation. Touch it to send continuous control signals.
Can I sync the sequencer to external gear?
Yes, via MIDI clock or CV/gate. The Sub 37 can send and receive sync signals through its MIDI and CV outputs.
How do I update the firmware?
Connect the Sub 37 to a computer via USB, download the latest firmware from Moog's website, and use the dedicated updater tool.
What is the difference between the Sub 37 and the Sub Phatty?
The Sub 37 has a 37-key keyboard with aftertouch, a sequencer, arpeggiator, and more patch memory compared to the Sub Phatty's smaller keyboard and fewer features.
User questions about Sub 37 Moog
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Synthesizer in PDF format for free! Find your manual Sub 37 - Moog and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Sub 37 by Moog.
USER MANUAL Sub 37 Moog
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Moog
Model : Sub 37
Category : Synthesizer