Fiberbox XGS2110 - Uncategorized Genexis - Free user manual and instructions
Find the device manual for free Fiberbox XGS2110 Genexis in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fiber Optic ONT/ONU Router |
| Dimensions (Approx.) | 180 x 120 x 35 mm |
| Weight (Approx.) | 300 g |
| Power Supply | 12V DC, 1A external adapter |
| Ethernet Ports | 1x 10/100/1000 RJ45 |
| Fiber Connector | SC/APC or SC/UPC |
| LED Indicators | Power, LOS, PON, LAN, WLAN, WPS |
| Wireless Standard | 802.11b/g/n/ac (Wi-Fi 5) |
| Frequency Band | 2.4 GHz and 5 GHz |
| Max Wireless Speed | 1200 Mbps (300 + 867) |
| Main Functions | Fiber to Ethernet conversion, routing, Wi-Fi access point, firewall, NAT, DHCP |
| Cooling | Passive (no fan) |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Cleaning | Wipe with soft dry cloth; avoid solvents |
| Safety Warnings | Do not cover vents; use only included power adapter; keep away from water |
| Spare Parts Availability | Adapter, fiber patch cable, Ethernet cable (contact support) |
| Repairability | Not user-serviceable; contact authorized service center |
| Warranty | Typically 2 years (check local terms) |
| Compliance | CE, RoHS |
Frequently Asked Questions - Fiberbox XGS2110 Genexis
How do I set up the Genexis Fiberbox XGS2110?
Connect the fiber cable to the SC port, power on the device, and connect your computer via Ethernet. Access the web interface at 192.168.1.1 (default) to configure Wi-Fi and other settings.
What are the default login credentials?
Default username is admin and password is admin or printed on the device label. It is recommended to change them after first login.
How can I reset the Fiberbox XGS2110 to factory settings?
Press and hold the Reset button on the back for about 10 seconds until all LEDs flash, then release. The device will reboot with default settings.
What do the LED indicators mean?
Power: solid green when on. LOS: red indicates no fiber signal. PON: solid green when registered with ISP. LAN: green when connected. WLAN: green when Wi-Fi is on. WPS: blinking during pairing.
Can I connect the Fiberbox XGS2110 to a third-party router?
Yes, you can set the device in bridge mode or connect via Ethernet to a router's WAN port. Configure the third-party router accordingly.
How do I update the firmware?
Log into the web interface, go to System Tools > Firmware Upgrade, upload the latest firmware from the Genexis support site, and follow the instructions.
Why is the LOS LED red?
A red LOS indicates no optical signal. Check if the fiber cable is securely connected, or contact your ISP to verify service activation.
Is the Fiberbox XGS2110 compatible with all ISPs?
It works with most fiber ISPs using GPON or EPON, but requires proper configuration. Check with your ISP for compatibility.
Can I wall mount the device?
The device is typically placed on a flat surface. Wall mounting is not officially supported, but you can use adhesive mounts at your own risk.
How do I contact Genexis support?
Visit the official Genexis website or contact your ISP for support. Keep your device model and serial number ready.
User questions about Fiberbox XGS2110 Genexis
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Fiberbox XGS2110 - Genexis and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Fiberbox XGS2110 by Genexis.
USER MANUAL Fiberbox XGS2110 Genexis
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Genexis
Model : Fiberbox XGS2110
Category : Uncategorized