Yoyo (L) - Loudspeaker CAMBRIDGE - Free user manual and instructions

Product Type	Portable Bluetooth Speaker
Brand	Cambridge
Model	Yoyo (L)
Dimensions (approx.)	200 x 100 x 100 mm (7.9 x 3.9 x 3.9 in)
Weight (approx.)	500 g (1.1 lbs)
Power Source	Built-in rechargeable lithium-ion battery, USB-C charging
Battery Life (approx.)	Up to 8 hours at moderate volume
Charging Time	Approximately 3 hours
Wireless Connectivity	Bluetooth 5.0 with A2DP, AVRCP, HFP
Inputs	3.5mm aux input, USB-C charging port
Output Power	2 x 10W (stereo)
Frequency Response	80 Hz - 20 kHz
Driver Size	2 x 2.5-inch full-range drivers
Microphone	Built-in for speakerphone calls
Controls	Power, Volume +/-, Play/Pause, Call answer/end, Bluetooth pairing button
Water Resistance	IPX5 (splash-proof)
Supported Audio Formats	MP3, WAV, AAC, FLAC
Operating Temperature	0°C to 40°C (32°F to 104°F)
Care and Cleaning	Wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Safety Precautions	Do not expose to extreme temperatures, liquids, or direct sunlight. Keep away from children.
Spare Parts and Repairability	Contact Cambridge customer service for battery replacement or repairs. Do not disassemble.
Package Contents	Speaker, USB charging cable, 3.5mm audio cable, user manual

Frequently Asked Questions - Yoyo (L) CAMBRIDGE

How do I pair the Cambridge Yoyo (L) speaker with my phone via Bluetooth?

Turn on the speaker by pressing the power button. Press and hold the Bluetooth button until the LED blinks blue. On your phone, enable Bluetooth and select 'Cambridge Yoyo (L)' from the list. Once connected, the LED will turn solid blue.

How long does the battery last on a full charge?

The built-in battery provides up to 8 hours of playback at moderate volume levels. Actual battery life may vary depending on volume and audio content.

How do I charge the speaker?

Use the included USB-C cable to connect the speaker to a USB power adapter or computer. The LED will indicate charging status. A full charge takes approximately 3 hours.

Can I use the speaker while it is charging?

Yes, you can play music while the speaker is charging. However, charging may take longer if used simultaneously.

Is the Cambridge Yoyo (L) waterproof?

The speaker has an IPX5 rating, meaning it is splash-proof and can withstand light rain or sweat, but it should not be submerged in water.

How do I reset the speaker to factory settings?

With the speaker on, press and hold the Bluetooth and Volume Up buttons simultaneously for about 5 seconds until the LED flashes rapidly. The speaker will reset and enter pairing mode.

Can I connect two Cambridge Yoyo (L) speakers for stereo sound?

This model does not support True Wireless Stereo pairing. For stereo, you can use a wired connection to a stereo system.

What should I do if the speaker does not turn on?

Ensure the battery is charged. Connect the charger and wait a few minutes, then try turning it on. If it still does not respond, try a reset as described above or contact support.

How do I clean the speaker?

Wipe the exterior with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials. Do not allow moisture to enter the ports.

Can I use a different charger?

Use only the provided USB-C cable and a compatible 5V/1A USB power adapter. Using a charger with higher voltage may damage the battery.

USER MANUAL Yoyo (L) CAMBRIDGE

ES30 Outdoor Speaker

Manual Generated: 21/09/2023 - 19:57

Table of Contents

ES30 Outdoor Speaker 3

Introduction 4

What's included with the ES30? 5

Installation instructions 6

Technical specifications 7

Frequently asked questions 8

Troubleshooting 9

ES30 Outdoor Speaker

Last updated: December 22, 2022 07:40. Revision #8288

Users Manual

Introduction

Last updated: January 19, 2023 02:36. Revision #8452

Thank you for purchasing these Cambridge Audio Incognito outdoor speakers. We hope that you enjoy many years of listening pleasure from them. Your speakers can only be as good as the system it is connected to. Please do not compromise on your amplifier or cabling. Naturally we particularly recommend amplification from the Cambridge Audio range, which has been designed to the same exacting standards as our speakers. Your dealer can also supply excellent quality speaker cable to ensure your system realises its full potential. Thank you for taking the time to read this manual, we do recommend you keep it for future reference.

This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer. All trademarks and registered trademarks are the property of their respective owners.

© Copyright Cambridge Audio Ltd.

For upcoming news on future products, software updates and exclusive offers, make sure you register your product at

http://www.cambridgeaudio.com/register

What's included with the ES30?

Last updated: January 19, 2023 02:36. Revision #8453

1. 1 x ES30 Outdoor Speaker
2. 1 x Mounting Bracket.

Installation instructions

Last updated: January 19, 2023 02:36. Revision #8454

Before installing your ES30 outdoor speakers, consider their positioning and requirements for cabling. Where possible use existing cover to minimise direct exposure to the elements and ensure that the wall being used for mounting will be able to support the weight of the speaker.

1. Firstly, mount the mounting bracket horizontally or vertically in your desired location, then feed your speaker cable through the bracket prior to connection.
2. With your amplifier turned off, connect the speaker using the terminals located on the rear panel. Please ensure that you match the polarity of each connection between speaker and amplifier.

1. Loosely fit the speaker to the mounting bracket and adjust it to your desired position. We would recommend angling the speaker downwards slightly to minimise direct exposure to the elements. Once you're happy with the positioning, tighten the two knobs to secure the speaker.

Technical specifications

Last updated: January 19, 2023 02:36. Revision #8455

Sensitivity (SPL)

90dB

Frequency Response

55Hz - 20kHz

Impedance

4 - 8 Ohms

Drivers

1 x 6.5" injection moulded cone woofer.

1 x 1" anodized aluminium dome tweeter.

Recommended Amplifier Power

10 - 120 Watts

Speaker Dimensions (H x W x D)

330 x 202 x 198mm.

Weight

3.4kg (7.4lbs)

Frequently asked questions

Last updated: January 19, 2023 02:36. Revision #8456

What is meant by speaker sensitivity?

Speaker sensitivity is the level produced by the speaker at one meter, when supplied with one watt of power from an amplifier. It's a way of describing how well the speaker produces acoustic energy, based on a given input. The level is measured in dB SPL – this shorthand for 'sound pressure level' – sound is basically fluctuations in air pressure, so any time you see SPL, this means 'sound in the real world'. So, let's say we have a speaker with an 87dB sensitivity, and a speaker with a 90dB sensitivity – the 90dB speaker is going to be considerably louder, as every 3dB added represents a doubling of power.

What is a crossover?

Most speakers will have multiple drivers. A driver is sometimes called a transducer, which is a device that turns one type of energy into another – in this case, electrical energy to sound energy. In a loudspeaker, it is often the case that we might want multiple drivers – one to handle low-end, one to handle the mid-range, and one to handle the treble. This latter driver is often called a tweeter. To get the benefit of this arrangement, we need to split the signal into different frequency components. The circuit that does this is called a crossover.

What is impedance?

You will often see impedance mentioned when researching speakers, and amplifiers. Impedance is basically resistance measured at a given frequency, given as a value in Ohms ( Ω ), and is incredibly important to consider when setting up an audio system as it determines the 'load' placed on an amplifier by the speakers.

For example, let's say we have an amplifier that is rated to deliver 100W into an 8Ω speaker load. If we were to then use speakers with an impedance of 4Ω with the same amplifier, the amp would then need to supply 200W as a halving of the impedance results in a doubling of the required power due to the reduction of the load on the amplifier.

In a situation such as this, if the amp can't supply the required power for a lower impedance, then it can result in overheating, and damage to the amplifier and speakers.

For this reason, it is important to pay attention to amplifier specifications, and suggested impedance ratings.

Troubleshooting

Last updated: January 19, 2023 02:36. Revision #8457

No sound through one or both channels.

• Check that the amplifier is turned on.
• Ensure that the correct input source is selected on the amplifier.
• Confirm that all connections between the amplifier and loudspeakers are secure.
• Check that the connections between the source equipment and amplifier are secure.
• Check the polarity of the loudspeaker connections.
• Check that the volume control is set correctly on the amplifier.

There is distorted or inconsistent sound.

• Confirm that all connections between the amplifier and loudspeakers are secure.
• Check the polarity of the loudspeaker connections.
• Check that the connections between the source equipment and amplifier are secure.