RS2100 - Barcode Reader ZEBRA - Free user manual and instructions
Find the device manual for free RS2100 ZEBRA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Handheld Barcode Reader |
| Model | RS2100 |
| Brand | Zebra |
| Dimensions (H x W x D) | 6.5 x 2.6 x 3.5 inches (165 x 66 x 89 mm) |
| Weight | 6.7 oz (190 g) |
| Power Source | USB bus power or rechargeable Li-ion battery (optional) |
| Scan Engine | 1D/2D imager |
| Wireless Connectivity | Bluetooth 5.0 (optional cradle) |
| Interface | USB HID (keyboard wedge) and USB CDC (virtual COM) |
| Supported Barcodes | EAN, UPC, Code 39, Code 128, QR, Data Matrix, PDF417 |
| IP Rating | IP54 (dust and splash resistant) |
| Drop Spec | 4 ft (1.2 m) to concrete |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Maintenance | Clean optical lens with soft, lint-free cloth; avoid solvents |
| Safety | Class 2 LED (eye safe) |
| Repairability | User-replaceable battery and scan window |
| Registration Required | Yes (to access firmware updates and full warranty) |
| Package Contents | Scanner, USB cable, quick start guide |
Frequently Asked Questions - RS2100 ZEBRA
How do I pair the RS2100 via Bluetooth?
Ensure the scanner is in pairing mode (press and hold the trigger until LED flashes blue). On your device, search for Bluetooth devices and select 'Zebra RS2100'. Follow on-screen prompts to complete pairing. For detailed steps, refer to the pairing section of the manual.
Can the RS2100 read barcodes from phone screens?
Yes, the RS2100 is designed to read both paper and digital barcodes, including those displayed on smartphone screens. Ensure the screen brightness is adequate and hold the scanner 4-6 inches away for best results.
How do I reset the scanner to factory defaults?
Scan the 'Factory Default' barcode from the user manual. Alternatively, hold the trigger for 10 seconds until the LED turns red, then release. This resets all settings except firmware.
Is the RS2100 compatible with iOS and Android?
Yes, the RS2100 works with iOS, Android, Windows, and macOS. When used wirelessly, it connects as a Bluetooth keyboard. For Android, ensure USB debugging is enabled for USB mode.
What is the scanning range for typical barcodes?
The RS2100 has a typical range of 0.5 to 12 inches (1.3 to 30.5 cm) for 1D barcodes, and up to 8 inches (20 cm) for 2D codes, depending on barcode density and ambient light.
How do I clean the scanner properly?
Power off the scanner. Wipe the exterior with a soft, slightly damp cloth (water only). Clean the optical lens with a dry, lint-free cloth. Do not use abrasive cleaners or solvents. Refer to the maintenance section for full details.
What should I do if the scanner stops scanning?
First, check the battery level (if wireless) or USB connection. Reboot the scanner by turning it off and on. If the issue persists, restore factory defaults. If still not working, contact Zebra support for potential hardware repair.
Can I replace the battery myself?
Yes, the RS2100 has a user-replaceable battery. Open the battery compartment on the back, remove the old battery, and insert a new one (Zebra part number BTRY-RS2100-00). Ensure proper polarity.
How do I update the firmware?
Download the latest firmware from the Zebra Support Portal (requires registration). Connect the scanner via USB, run the firmware update tool, and follow the instructions. Do not disconnect during update.
What is the warranty period for the RS2100?
Zebra offers a standard one-year limited warranty covering defects in materials and workmanship. Extended warranties are available for purchase. Register your product online to activate warranty.
User questions about RS2100 ZEBRA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Barcode Reader in PDF format for free! Find your manual RS2100 - ZEBRA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RS2100 by ZEBRA.
USER MANUAL RS2100 ZEBRA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ZEBRA
Model : RS2100
Category : Barcode Reader