Hikvision

DS-PKF201-WE - Alarm system Hikvision - Free user manual and instructions

Find the device manual for free DS-PKF201-WE Hikvision in PDF.

📄 13 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Hikvision DS-PKF201-WE - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Wireless Alarm Keypad
Brand Hikvision
Model DS-PKF201-WE
Display 128 x 64 OLED
Keypad 16 keys + 2 function keys
Wireless Frequency 2.4 GHz
Power Supply 4 x AA batteries (not included)
Battery Life Up to 1 year (typical usage)
Tamper Protection Yes, built-in tamper switch
Mounting Wall mountable (surface mount)
Dimensions 86 x 86 x 25 mm
Weight 110 g (without batteries)
Operating Temperature -10°C to 55°C
Operating Humidity 10% to 90% (non-condensing)
Certifications CE, FCC, RoHS
Compatibility Hikvision alarm panels
Color White
Material ABS plastic
Maintenance Wipe with a dry cloth; avoid liquids
Security Features Tamper alarm, anti-scrambling code, RFID card support
Spare Parts & Repairability Batteries not included; no user-serviceable parts; contact Hikvision support

Frequently Asked Questions - DS-PKF201-WE Hikvision

How do I pair the DS-PKF201-WE with my Hikvision alarm panel?
To pair the keypad, ensure the panel is in pairing mode (refer to panel manual). On the keypad, enter the default installer code (usually 1234) and navigate to the wireless device menu. Select 'Add Device', then press the tamper switch or a key on the keypad to register. The panel will confirm pairing.
What type of batteries does the DS-PKF201-WE use?
The keypad uses 4 AA alkaline batteries. Do not use rechargeable batteries as they may have lower voltage and affect performance. Battery life is typically up to 1 year under normal use.
How do I change the master code on the keypad?
Press [*] + [Master Code] (default 1234) + [#]. Then press [1] for User Code, enter new 4-6 digit code, confirm, and press [#]. To change the installer code, use [2] instead. Refer to the manual for full instructions.
What is the wireless range of the DS-PKF201-WE?
The wireless range is up to 300 meters in open air with the alarm panel. Obstacles like walls may reduce range. For optimal performance, ensure the panel and keypad are within 100 meters in typical indoor environments.
Can I use the DS-PKF201-WE with other alarm systems?
The keypad is specifically designed for Hikvision alarm panels and uses proprietary 2.4 GHz communication. It may not work with third-party systems. Always check compatibility with your panel model.
How do I reset the keypad to factory defaults?
Remove batteries. Press and hold the [*] and [#] keys simultaneously while reinserting batteries. Wait for the display to show 'Factory Reset' and release keys. Confirm by pressing [*]. All codes and settings will be erased.
What does the tamper alarm do?
The tamper alarm triggers if the keypad is forcibly removed from the wall or opened. It sends an alarm signal to the panel. To reset, securely remount and reattach the backplate, then disarm the system.
How do I clean the keypad?
Use a soft, dry cloth to wipe the surface. Do not use water, solvents, or abrasive cleaners. For stubborn dirt, slightly dampen the cloth with water and immediately dry. Avoid moisture entering the device.
The keypad display is dim or unresponsive. What should I do?
First, check battery voltage. Replace with fresh AA batteries if low. If display is still dim, check the contrast setting (press [*] + [Master Code] + [#], then press [3] to adjust). If unresponsive, perform a factory reset. If issue persists, contact Hikvision support.
Can I use RFID cards with the DS-PKF201-WE?
Yes, the keypad supports RFID cards for arming/disarming. To enroll a card, enter installer menu, select 'Card Management', then present the card to the keypad's RFID reader. The card ID will be stored. Up to 50 cards can be enrolled.

User questions about DS-PKF201-WE Hikvision

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Alarm system in PDF format for free! Find your manual DS-PKF201-WE - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-PKF201-WE by Hikvision.

USER MANUAL DS-PKF201-WE Hikvision

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Hikvision

Model : DS-PKF201-WE

Category : Alarm system