PEW 626 CG - Range hood Philco - Free user manual and instructions
Find the device manual for free PEW 626 CG Philco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cooker Hood |
| Brand | Philco |
| Model | PEW 626 CG |
| Width | 60 cm |
| Dimensions (WxDxH) | 598 x 500 x 140 mm (approx.) |
| Weight | 12 kg (approx.) |
| Power Supply | 220-240 V ~ 50 Hz |
| Motor Power | 200 W (approx.) |
| Lighting Power | 2 x 20 W halogen or LED (depending on version) |
| Max Extraction Capacity | 450 m³/h (approx.) |
| Noise Level (max speed) | 65 dB(A) (approx.) |
| Number of Speeds | 3 |
| Type of Controls | Slider or push buttons |
| Exhaust Diameter | 150 mm |
| Grease Filter Type | Aluminium mesh, washable |
| Carbon Filter (optional) | Yes, replaceable |
| Recirculation Mode | Possible with carbon filter |
| Energy Class | B (approx.) |
| Safety Features | Automatic shutdown on overheating |
| Spare Parts | Grease filters, carbon filter, bulbs |
| Maintenance | Clean grease filter monthly; replace carbon filter every 3-6 months |
Frequently Asked Questions - PEW 626 CG Philco
How do I install the Philco PEW 626 CG cooker hood?
Installation must be done by a qualified professional. Ensure the hood is mounted at least 65 cm above the hob for electric cookers and 75 cm for gas. Use the provided template for drilling and fix the hood securely. Connect to a proper electrical outlet with grounding.
Can I use the hood in recirculation mode without an external duct?
Yes, the hood can be used in recirculation mode by installing a carbon filter (not supplied). This mode filters the air and recirculates it back into the kitchen.
How often should I clean the grease filter?
The aluminium grease filter should be cleaned every month under normal usage. It can be washed by hand with mild detergent or in a dishwasher at low temperature.
How do I replace the carbon filter?
The carbon filter should be replaced every 3 to 6 months depending on usage. To replace, remove the grease filter, take out the old carbon filter, and insert the new one, ensuring it fits securely.
What do I do if the hood is not extracting air properly?
Check if the grease filter is dirty and clean it. Ensure the external duct is not blocked. If the hood is in recirculation mode, replace the carbon filter. Also verify that the motor is running.
How do I change the light bulb?
First, disconnect the power supply. Remove the light cover by gently prying it off. Unscrew the old bulb and replace it with a new one of the same type (max 20W, G4 base). Reattach the cover and restore power.
What does the 'CG' in the model number stand for?
The 'CG' likely indicates a specific design or series (e.g., 'C' for classic or 'G' for glass). It is a model variant identifier.
Is the Philco PEW 626 CG suitable for use above a gas hob?
Yes, but ensure the minimum distance between the hob and the hood is at least 75 cm, as recommended for gas hobs. Follow the safety instructions in the manual.
Why does my hood make a loud noise?
Loud noise may indicate loose parts, a blocked motor, or dirty filters. First, check that the hood is securely mounted and tighten any screws. Clean the filters. If noise persists, contact a service technician.
Where can I purchase spare parts for this hood?
Spare parts such as grease filters, carbon filters, and bulbs can be purchased from authorized Philco dealers, online spare parts retailers, or directly from the manufacturer.
User questions about PEW 626 CG Philco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual PEW 626 CG - Philco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PEW 626 CG by Philco.