Omada SG3428XF - Network switch TP-LINK - Free user manual and instructions
Find the device manual for free Omada SG3428XF TP-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed L2+ Gigabit Switch with 10G Uplinks |
| Ports | 24 x 10/100/1000 Mbps RJ45, 4 x 10G SFP+ Slots |
| Switching Capacity | 128 Gbps |
| MAC Address Table | 16K |
| Management | Web GUI, CLI, SNMP, RMON, Omada SDN Controller |
| VLAN Support | 802.1Q VLAN, up to 4K VLANs |
| Power Supply | 100-240V AC, 50/60 Hz, Internal Power Adapter |
| Power Consumption | ≤ 25W (without PoE) |
| Dimensions (W x D x H) | 440 x 220 x 44 mm (17.3 x 8.7 x 1.7 in) |
| Weight | 2.7 kg (5.95 lbs) |
| Mounting | Rackmountable, 19-inch 1U |
| Cooling | Fanless, silent operation |
| Operating Temperature | 0 °C to 45 °C (32 °F to 113 °F) |
| Safety Certifications | CE, FCC, RoHS |
| Maintenance | Clean with dry cloth; avoid liquids; keep vents unobstructed |
| Spare Parts | Not user-serviceable; contact TP-Link support for RMA |
| Warranty | Limited lifetime warranty (terms apply) |
Frequently Asked Questions - Omada SG3428XF TP-LINK
How to reset the TP-Link Omada SG3428XF switch to factory defaults?
Press and hold the Reset button on the front panel for about 5 seconds until all LEDs flash. Release the button; the switch will reboot with default settings.
Does the SG3428XF support PoE?
No, the SG3428XF is a non-PoE switch. It is a pure data switch with 24 Gigabit Ethernet ports and 4 10G SFP+ slots. Consider the Omada SG3428XPP for PoE support.
How to configure VLANs on this switch?
Access the web interface, go to L2 Features > VLAN. Create 802.1Q VLANs, assign ports as tagged or untagged. You can also configure VLAN groups and management VLAN.
Can I use the SG3428XF with an Omada controller?
Yes, it supports Omada SDN for centralized cloud management. You can adopt the switch into the Omada controller for unified configuration and monitoring.
What is the default IP address to access the management interface?
The default IP is 192.168.0.1 (if no DHCP server). Set your computer to a static IP in the same subnet (e.g., 192.168.0.100) and connect via HTTP. Default login: admin/admin.
How to update the firmware on the switch?
Download the latest firmware from TP-Link's support site. In the web GUI, go to System > Firmware Upgrade, upload the file, and wait for the process to complete. Do not power off during upgrade.
What cable types are supported for the SFP+ ports?
The SFP+ slots support 10G SFP+ modules (e.g., SR, LR, LRM) and passive direct attach cables (DAC) up to 7 meters. Compatible TP-Link modules are recommended.
How to enable link aggregation (LACP)?
Navigate to L2 Features > LAG, create a new LAG group, add member ports, and set LACP mode to active or passive. Ensure the connected device supports LACP.
Is the switch fanless? What is the noise level?
Yes, the SG3428XF is fanless and operates silently with zero noise, making it ideal for office or home environments.
Can I mount the switch on a wall?
The switch is designed for 19-inch rack mounting. Wall mounting is not officially supported. Use a shelf or rack to ensure proper ventilation and stability.
User questions about Omada SG3428XF TP-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual Omada SG3428XF - TP-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Omada SG3428XF by TP-LINK.
USER MANUAL Omada SG3428XF TP-LINK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TP-LINK
Model : Omada SG3428XF
Category : Network switch