Smart-UPS SCL500RMI1U - Inverter APC - Free user manual and instructions
Find the device manual for free Smart-UPS SCL500RMI1U APC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Uninterruptible Power Supply (UPS) |
| Model | APC Smart-UPS SCL500RMI1U |
| VA Rating | 500 VA |
| Watts Rating | 300 W |
| Topology | Line Interactive |
| Form Factor | Rackmount 1U |
| Input Voltage | 120 V |
| Output Voltage | 120 V ± 5% |
| Number of Outlets | 6 (NEMA 5-15R) |
| Battery Type | Sealed Lead-Acid |
| Typical Backup Time | 10 minutes at half load |
| Dimensions (H x W x D) | 1.75 x 17.0 x 14.0 in (44 x 432 x 356 mm) |
| Weight | 18.5 lbs (8.4 kg) |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Communication Ports | USB, Serial, SmartSlot |
| Protection Features | Surge protection, noise filtering, automatic voltage regulation |
| Maintenance | Hot-swappable battery user replaceable |
| Safety Certifications | UL, CSA, FCC |
| Warranty | 3 years |
Frequently Asked Questions - Smart-UPS SCL500RMI1U APC
What does the APC Smart-UPS SCL500RMI1U protect against?
It protects against power outages, brownouts, surges, and noise interference, providing regulated backup power.
How long does the battery last?
Typical backup time is about 10 minutes at half load (150W). Full load (300W) lasts approximately 3-4 minutes.
Can I replace the battery myself?
Yes, the battery is hot-swappable and user-replaceable. Refer to the manual for compatible battery packs.
How do I connect the UPS to my computer?
Use the included USB cable or serial cable. Install APC PowerChute software for automatic shutdown during power events.
What is the input voltage requirement?
It accepts 120 V nominal input voltage. Do not connect to 220-240 V unless step-down transformer is used.
Is the UPS rack-mountable?
Yes, it is designed for 19-inch racks and occupies 1U of space. Rack-mount kit included.
What do the front panel indicators mean?
Green LED indicates normal operation; orange means battery backup; red signals battery low or fault. Refer to manual for full details.
How do I test the UPS?
Press the test button briefly to perform a self-test. The UPS will simulate a power loss to verify battery and inverter function.
Can I connect a laser printer to the UPS?
No, laser printers draw high surge current and can overload the UPS. Only use for sensitive electronics like computers, routers.
What should I do when the alarm sounds continuously?
Continuous alarm indicates battery is discharged or faulty. Allow charging for 24 hours. If persists, replace battery.
User questions about Smart-UPS SCL500RMI1U APC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Inverter in PDF format for free! Find your manual Smart-UPS SCL500RMI1U - APC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Smart-UPS SCL500RMI1U by APC.
USER MANUAL Smart-UPS SCL500RMI1U APC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : APC
Model : Smart-UPS SCL500RMI1U
Category : Inverter