Walrus Audio

Fable - Uncategorized Walrus Audio - Free user manual and instructions

Find the device manual for free Fable Walrus Audio in PDF.

📄 5 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Walrus Audio Fable - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeGuitar Effects Pedal (Delay/Reverb)
ModelFable
BrandWalrus Audio
Dimensions4.5" x 3.5" x 2.5" (114.3 x 88.9 x 63.5 mm)
WeightApprox. 1.0 lb (454 g)
Power Supply9V DC, Center Negative, 300 mA minimum
Battery9V Alkaline (Not Included)
Input Impedance1 MΩ
Output Impedance100 Ω
Signal ProcessingDigital (Stereo)
BypassTrue Bypass
ControlsMix, Decay, Tone, Regen, Mod Depth/Type, Shimmer, Pad, Preset
Presets3 Onboard Presets (via internal dip switches)
Audio Input1/4" TS (Monaural)
Audio Output1/4" TRS (Stereo) (Monaural if TS)
Expression ControlOptional external expression pedal (TRS)
MIDINot Supported
HousingAluminum Enclosure
Net Weight (boxed)Approx. 1.5 lb (680 g)
Operating Temperature32°F to 90°F (0°C to 32°C)
CertificationsCE, FCC
MaintenanceClean with dry cloth; avoid water and solvents
SafetyUse only recommended power supply; do not expose to moisture
Repair / PartsContact Walrus Audio support; no user-serviceable parts

Frequently Asked Questions - Fable Walrus Audio

What is the power requirement for the Fable pedal?
The Fable requires a 9V DC center-negative power supply with at least 300 mA. A 9V battery can also be used for standard operation.
How do I save presets on the Fable?
Presets are saved by holding the bypass footswitch for 3 seconds. There are 3 onboard preset locations accessible via internal dip switches.
Can I use the Fable in stereo?
Yes, the Fable features stereo input/output. Use a TRS cable for stereo output; using a TS cable will sum to mono.
What do the different controls do?
Mix controls wet/dry blend; Decay sets reverb length; Tone adjusts brightness; Regen controls feedback; Mod adds modulation. Shimmer and Pad are unique algorithms.
Is the Fable true bypass?
Yes, the Fable uses true bypass to ensure no signal degradation when the effect is off.
How do I update the firmware?
Firmware updates are not user-serviceable. Contact Walrus Audio for any required updates.
Can I connect an expression pedal?
Yes, an optional external expression pedal (TRS) can be connected to control mix, decay, or other parameters in real time.
What is the warranty period?
Walrus Audio offers a limited lifetime warranty to the original owner. Register your pedal online for full coverage.
How do I clean the pedal?
Wipe with a dry, lint-free cloth. Do not use any liquids or solvents as they may damage the finish.
Where can I download a user manual?
The manual is available for free on notice-facile.com in PDF format. You can also find it on the Walrus Audio website.

User questions about Fable Walrus Audio

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Uncategorized in PDF format for free! Find your manual Fable - Walrus Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Fable by Walrus Audio.

USER MANUAL Fable Walrus Audio

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Walrus Audio

Model : Fable

Category : Uncategorized