ER707-M2 - Router TP-LINK - Free user manual and instructions
Find the device manual for free ER707-M2 TP-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Multi-WAN Gigabit VPN Router |
| Model | ER707-M2 |
| Brand | TP-Link |
| Dimensions (W x D x H) | 440 x 220 x 44 mm (rackmount, 1U) |
| Weight | 2.5 kg |
| Power Supply | External 12V DC, 2A |
| WAN Ports | 1x Gigabit RJ45 + 1x Gigabit SFP |
| LAN Ports | 4x Gigabit RJ45 |
| USB Ports | 1x USB 2.0 |
| Console Port | 1x RJ45 (115200 baud) |
| VPN Support | IPsec, OpenVPN, L2TP, PPTP |
| Firewall Features | SPI firewall, DoS defense, ACL, NAT |
| Load Balancing | Policy-based, failover, link backup |
| QoS | Bandwidth control per IP/port |
| VLAN | 802.1Q VLAN, up to 32 VLANs |
| Routing Protocols | Static, RIP, OSPF, BGP |
| Management | Web GUI, CLI (Telnet/SSH), SNMP |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Mounting | 19" rackmount, desktop |
| Maintenance | Clean with dry cloth; do not use liquids |
| Safety | Keep ventilated; avoid moisture and heat sources |
| Spare Parts | Power adapter, rackmount ears, console cable |
| Repairability | No user-serviceable parts; contact support |
Frequently Asked Questions - ER707-M2 TP-LINK
How do I reset the TP-Link ER707-M2 to factory defaults?
Press and hold the Reset button (located on the front panel) for at least 10 seconds while the device is powered on. Release the button when the SYS LED blinks rapidly. The router will reboot with factory settings.
What is the default IP address and login for the ER707-M2?
The default IP address is 192.168.0.1. Username: admin (all lowercase), Password: admin (or blank on some firmware). It is recommended to change the password after first login.
Can I use the ER707-M2 as a VPN server?
Yes, the ER707-M2 supports IPsec, OpenVPN, L2TP, and PPTP server/client modes. You can configure VPN connections via the web interface under VPN menu.
How do I update the firmware on the ER707-M2?
Download the latest firmware from TP-Link's support website. Log in to the web interface, go to System Tools > Firmware Upgrade, select the file, and click Upgrade. Do not power off during the process.
Does the ER707-M2 support load balancing across multiple WAN connections?
Yes, it supports policy-based load balancing, failover, and link backup. You can configure multiple WANs and set rules in Network > WAN and Routing > Load Balancing.
What is the maximum throughput of the ER707-M2?
The throughput varies by scenario. For NAT routing, it can reach up to 940 Mbps. For VPN (IPsec), it is around 150 Mbps. Actual performance depends on traffic and settings.
How can I configure VLANs on the ER707-M2?
Go to Network > VLAN to create 802.1Q VLANs. You can assign ports to VLANs and set trunk ports. Up to 32 VLANs are supported.
Can I manage the ER707-M2 remotely?
Yes, enable Remote Management under System Tools > Management. You can also use SSH or SNMP for remote access. Ensure to secure it with a strong password and restrict IPs.
What does the SFP port do?
The SFP port is a Gigabit SFP slot for fiber optic or copper SFP modules. It can be used as a second WAN or LAN port, providing flexibility for long-distance connections.
Does the ER707-M2 support IPv6?
Yes, it supports IPv6 with static, DHCPv6, PPPoE, and tunnel modes. IPv6 firewall and routing policies are configurable via the web interface.
User questions about ER707-M2 TP-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual ER707-M2 - TP-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ER707-M2 by TP-LINK.