AquaForce 30HXC - Water pump CARRIER - Free user manual and instructions
Find the device manual for free AquaForce 30HXC CARRIER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Water chiller / heat pump |
| Brand | Carrier |
| Model | AquaForce 30HXC |
| Cooling Capacity | 200-1500 kW (typical range) |
| Heating Capacity | 150-1300 kW (typical range) |
| Refrigerant | R134a or R1234ze |
| Compressor Type | Screw compressor |
| Dimensions (L x W x H) | 3000 x 1200 x 2000 mm (approx.) |
| Weight | 3000-6000 kg (depending on configuration) |
| Power Supply | 400V / 3-phase / 50Hz |
| Electrical Consumption | 50-400 kW (at full load) |
| Water Flow Rate | 10-150 l/s (typical) |
| Water Connection Size | DN100 to DN250 |
| Max Operating Pressure | 10 bar |
| Sound Pressure Level | 75-85 dB(A) at 10 m |
| Control System | Microprocessor with touchscreen interface |
| Maintenance | Regular coil cleaning, filter replacement, oil check |
| Safety Features | High/low pressure switches, overload protection, flow switch |
| Spare Parts Availability | Through authorized Carrier distributors |
| Repairability | Modular design with accessible components |
| Manual Language | English (original) |
| Manual Pages | 48 |
Frequently Asked Questions - AquaForce 30HXC CARRIER
What type of device is the Carrier AquaForce 30HXC?
The Carrier AquaForce 30HXC is a water-cooled chiller or heat pump designed for commercial and industrial applications, providing efficient cooling and heating.
What refrigerant does the AquaForce 30HXC use?
The AquaForce 30HXC typically uses R134a or R1234ze refrigerant, depending on the configuration and environmental requirements.
How do I maintain the AquaForce 30HXC?
Regular maintenance includes cleaning the condenser coils, checking and replacing filters, inspecting electrical connections, and monitoring oil levels in the compressor. Refer to the manual for a detailed schedule.
What are the safety features of this unit?
The unit is equipped with high and low pressure switches, overload protection for the compressor, a flow switch to prevent dry running, and emergency stop functionality.
How do I reset the alarm on the AquaForce 30HXC?
Alarms can be reset via the control panel. Press the reset button after clearing the cause of the alarm. If the alarm persists, consult the troubleshooting section of the manual.
Can the AquaForce 30HXC be used for both cooling and heating?
Yes, models with the heat pump option can provide both cooling and heating by reversing the refrigeration cycle. Check the model designation for heat pump capability.
What are the recommended installation requirements?
Installation requires a level concrete foundation, adequate clearance for airflow and maintenance, proper electrical supply (e.g., 400V/3-phase/50Hz), and water piping with correct flow rates.
Where can I find replacement parts?
Replacement parts are available through Carrier authorized distributors. Use the part numbers listed in the manual or contact Carrier support for assistance.
How do I clean the water filters?
Water filters should be cleaned by removing the filter cartridge and flushing it with water. Replace if damaged. Frequency depends on water quality; typically every 3-6 months.
What is the maximum operating pressure?
The maximum operating pressure for the water side is typically 10 bar. Refer to the nameplate for exact values specific to your unit.
User questions about AquaForce 30HXC CARRIER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water pump in PDF format for free! Find your manual AquaForce 30HXC - CARRIER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AquaForce 30HXC by CARRIER.