75141850 - Touch switch HAGER - Free user manual and instructions
Find the device manual for free 75141850 HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Miniature Circuit Breaker (MCB) |
| Brand | Hager |
| Model | 75141850 |
| Number of Poles | 1 Pole |
| Rated Voltage | 230/400 V AC |
| Rated Current | 16 A |
| Breaking Capacity | 6 kA |
| Frequency | 50/60 Hz |
| Tripping Characteristic | C-curve |
| Dimensions (H x W x D) | 90 x 18 x 70 mm |
| Weight | 0.15 kg |
| Mounting | DIN rail (35 mm) |
| Terminal Capacity | 1 - 25 mm² |
| Degree of Protection | IP20 |
| Operating Temperature | -25°C to +55°C |
| Energy Limitation Class | 3 |
| Mechanical Life | 20,000 cycles |
| Standards | IEC/EN 60898-1 |
| Environmental Compliance | RoHS compliant |
Frequently Asked Questions - 75141850 HAGER
What is the rated current of the Hager 75141850?
The rated current is 16 A.
Can this circuit breaker be used for both 230V and 400V systems?
Yes, it is rated for 230/400 V AC, suitable for single-phase and three-phase applications when used with appropriate poles.
What is the tripping curve of the 75141850?
It has a C-curve characteristic, designed for moderate inrush currents like those from motors and transformers.
How do I install the Hager 75141850 on a DIN rail?
Simply snap the device onto a 35 mm DIN rail. Ensure the rail is clean and the latch engages securely.
What is the maximum wire size that can be connected?
The terminal can accommodate wires from 1 to 25 mm² in cross-section.
Is the Hager 75141850 suitable for outdoor installation?
No, it has an IP20 rating, meaning it is protected against solid objects larger than 12 mm but not against water. It should be installed indoors or in a weatherproof enclosure.
What should I do if the circuit breaker trips frequently?
Frequent tripping may indicate a short circuit, overload, or a faulty appliance. Check connected devices and wiring. If the problem persists, consult a qualified electrician.
Does this model comply with international standards?
Yes, it complies with IEC/EN 60898-1 standards for miniature circuit breakers.
Can I replace a blown fuse with this MCB?
Yes, this MCB can replace a fuse of the same rating, but ensure the breaking capacity and curve are compatible with your installation.
How do I reset the Hager 75141850 after a trip?
First, eliminate the cause of the trip. Then, push the toggle switch firmly to the ON position. If it trips immediately again, do not force it; call an electrician.
User questions about 75141850 HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Touch switch in PDF format for free! Find your manual 75141850 - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 75141850 by HAGER.
USER MANUAL 75141850 HAGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAGER
Model : 75141850
Category : Touch switch