Excursion 5 - Boat INTEX - Free user manual and instructions
Find the device manual for free Excursion 5 INTEX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Inflatable Boat |
| Brand | Intex |
| Model | Excursion 5 |
| Color | Gray, White, Blue |
| Material | Super-Tough PVC |
| Inflated Dimensions | 132 x 67 x 20 inches (335 x 170 x 51 cm) |
| Deflated Dimensions | 36 x 18 x 12 inches (91 x 46 x 30 cm) |
| Weight | 62 lbs (28 kg) |
| Passenger Capacity | 5 persons |
| Maximum Weight Capacity | 1320 lbs (600 kg) |
| Number of Air Chambers | 3 |
| Floor Type | Slat floor (removable) |
| Included Accessories | 2 oars, high-output pump, repair kit, carry bag |
| Motor Compatibility | Up to 2.5 hp (max 3 hp) |
| Valve Type | Boston valve |
| Recommended Inflation Pressure | 0.07 bar (1 psi) |
| Warranty | 90 days limited |
| Safety Features | Grab lines, oar locks, motor mount, safety valve |
| Cleaning and Maintenance | Hand wash with mild soap, dry thoroughly, store in cool dry place |
| Repair Kit Contents | PVC patches, glue, sandpaper |
| Uses | Lakes, calm rivers, coastal areas |
Frequently Asked Questions - Excursion 5 INTEX
How do I inflate and assemble the Excursion 5?
Unfold the boat on a flat surface. Attach the pump to the Boston valve and inflate the main chambers to 1 psi (0.07 bar). Insert the slat floor panels and secure them. Inflate the floor. Finally, attach the oars and motor mount.
What is the maximum motor rating for this boat?
The recommended maximum motor power is 2.5 hp, but a 3 hp motor may be used with caution. Ensure the motor is mounted on the designated motor mount.
How do I repair a puncture?
Deflate the boat. Clean the damaged area with sandpaper from the repair kit. Apply glue to the patch and press firmly. Wait 12 hours before re-inflating.
Can I use this boat in saltwater?
Yes, but rinse thoroughly with fresh water after each use to prevent corrosion and material degradation.
How do I deflate and store the boat?
Open all valves fully. Roll the boat from the bow to squeeze out air. Fold or roll it, and place in the carry bag. Store in a cool, dry place away from direct sunlight.
What is the weight limit for 5 passengers?
The total maximum weight capacity is 1320 lbs (600 kg), including passengers and gear. Distribute weight evenly.
Is the boat stable in choppy water?
The Excursion 5 is designed for calm waters. Avoid rough or open seas. The multiple air chambers provide buoyancy and stability.
Can I tow the boat with another vessel?
Towing is not recommended. If necessary, use a tow line attached to the grab lines at the bow, and keep speed low.
How often should I replace the oars?
Check oars for cracks or wear before each use. Replace if damaged. Under normal use, they can last several seasons.
Does the boat come with a warranty?
Yes, Intex provides a 90-day limited warranty against manufacturing defects. Register your product online for support.
User questions about Excursion 5 INTEX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Boat in PDF format for free! Find your manual Excursion 5 - INTEX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Excursion 5 by INTEX.
USER MANUAL Excursion 5 INTEX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : INTEX
Model : Excursion 5
Category : Boat