41202 - Washing machine KENMORE - Free user manual and instructions
Find the device manual for free 41202 KENMORE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Washing Machine |
| Brand | Kenmore |
| Model | 41202 |
| Width | 27 inches |
| Depth | 27 inches |
| Height | 39 inches |
| Weight | 150 lbs |
| Power Supply | 120 V, 60 Hz, 10 A |
| Wash Cycles | Normal, Delicate, Heavy Duty, Quick Wash, Rinse & Spin |
| Temperature Settings | Cold, Cool, Warm, Hot |
| Spin Speed | Up to 800 RPM |
| Capacity | 3.5 cu. ft. |
| Child Lock | Yes |
| Overfill Protection | Yes |
| Dispensers | Detergent, Bleach, Fabric Softener |
| Door Type | Front Load |
| Lint Filter | Yes, accessible at bottom |
| Interior Drum Material | Stainless Steel |
| Noise Level | 65 dB (wash), 75 dB (spin) |
| Energy Star Certified | Yes |
| Water Consumption | About 20 gallons per load |
| Repairability | Replacement parts available online |
| Maintenance | Clean door seal, dispenser drawer, and lint filter monthly |
Frequently Asked Questions - 41202 KENMORE
How do I clean the lint filter on my Kenmore 41202?
Locate the lint filter at the bottom front of the machine. Open the access panel, pull out the filter, rinse it under warm water, and replace it after drying.
What should I do if the washing machine does not start?
Ensure the door is fully closed and latched. Check that the power cord is plugged in and the circuit breaker hasn't tripped. Also verify that the water supply valves are open.
How can I clean the detergent dispenser?
Remove the dispenser drawer by pressing the release tab. Wash it with warm soapy water, use a brush to remove residue, and rinse thoroughly before replacing.
The machine is leaking water. What could be the cause?
Common causes include a loose hose connection, damaged door seal, or over-sudsing. Check hoses for tightness, inspect the rubber gasket for cracks, and reduce detergent amount.
How do I run a cleaning cycle on the Kenmore 41202?
Select the 'Clean Washer' cycle if available, or run a hot water cycle with a cup of white vinegar or a washing machine cleaner. Make sure the drum is empty.
What does the error code 'E1' mean?
Error code E1 usually indicates a water supply issue. Check that both hot and cold water valves are open and that the inlet hoses are not kinked or clogged.
Can I install the washing machine myself?
Yes, but you need tools to connect the hoses, level the machine, and secure the drain hose. Follow the installation manual carefully or hire a professional.
How do I clean the door seal (gasket)?
Wipe the rubber gasket with a damp cloth after each use. For mildew, use a solution of bleach and water (1:4) and let it sit for 10 minutes, then rinse.
Why is my laundry still wet after the spin cycle?
Ensure the load is balanced and not overloaded. The machine may vibrate and reduce spin speed. Also check that the drain hose is not clogged.
Where can I find replacement parts for the Kenmore 41202?
Replacement parts are available online through Kenmore's website, Amazon, or appliance parts retailers. Use your model number for accurate compatibility.
User questions about 41202 KENMORE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual 41202 - KENMORE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 41202 by KENMORE.
USER MANUAL 41202 KENMORE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KENMORE
Model : 41202
Category : Washing machine