SHU671X - Basket SMEG - Free user manual and instructions
Find the device manual for free SHU671X SMEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Cooker Hood |
| Model | SHU671X |
| Brand | Smeg |
| Color | Stainless Steel |
| Width | 70 cm |
| Depth | 50 cm (approx.) |
| Height | Adjustable, up to 150 cm chimney |
| Weight | 12 kg (approx.) |
| Power Supply | 220-240 V ~ 50/60 Hz |
| Motor Power | 280 W (approx.) |
| Lighting | 2 x 1.5 W LED |
| Number of Speeds | 3 + Intensive |
| Max Extraction Rate | 650 m³/h (max speed) |
| Noise Level | 65 dB(A) at max speed (approx.) |
| Filter Type | Aluminum grease filter (washable) |
| Carbon Filter | Optional (recirculation mode) |
| Control Type | Sliding or push-button |
| Mounting | Under cabinet or wall mounted |
| Exhaust Diameter | 150 mm |
| Energy Efficiency Class | A+ (approx.) |
| Annual Energy Consumption | 50 kWh/a (approx.) |
| Grease Filter Reminder | Yes (LED indicator) |
| Replacement Parts Available | Filters, LEDs, motor, controls |
| Warranty | 2 years (EU standard) |
Frequently Asked Questions - SHU671X SMEG
How do I clean the grease filter?
Remove the aluminum grease filter and wash it by hand with warm soapy water or in the dishwasher at low temperature. Allow it to dry completely before reinstalling. Clean every 2 months or when the filter indicator lights up.
How do I reset the filter saturation indicator?
After cleaning or replacing the filters, press and hold the speed selection button for 3 seconds until the LED flashes and turns off. This resets the indicator.
Can this hood be used in recirculation mode?
Yes, you can install an optional carbon filter for recirculation mode. The carbon filter absorbs odors and must be replaced every 4-6 months. Ensure the outlet is open for air recirculation.
What are the dimensions for installation?
The hood width is 70 cm. For proper installation, the distance between the hob and the hood should be between 65-75 cm for electric hobs and 75-85 cm for gas hobs. Refer to the manual for exact measurements.
How do I replace the LED lights?
The LED lights are integrated and should be replaced by a qualified technician. Contact Smeg customer service or an authorized repair center. Do not attempt to replace them yourself to avoid electrical shock.
Why is the hood not extracting properly?
Check if the grease filter is clogged and clean it. Ensure the exhaust duct is not blocked or kinked. Also, verify that the carbon filter (if used) is not saturated. If the problem persists, check the fan motor.
What is the noise level of this hood?
The noise level varies by speed: typical values are 48 dB(A) at minimum speed, 58 dB(A) at medium, and 65 dB(A) at maximum speed (intensive mode may be louder). These are approximate values.
How do I switch between extraction and recirculation mode?
For extraction mode, connect the exhaust pipe to an external outlet. For recirculation, install the carbon filter and ensure the air outlet is directed back into the kitchen. The hood does not require mode switching; it depends on the installation.
Where can I find spare parts?
Spare parts such as filters, LEDs, and buttons can be ordered from Smeg authorized dealers or online. Use the model number SHU671X to ensure compatibility. Always use original parts for safety.
Does the hood come with a remote control?
No, this model is controlled via manual buttons on the hood. There is no remote control included. You can adjust speeds and lights directly.
User questions about SHU671X SMEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Basket in PDF format for free! Find your manual SHU671X - SMEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SHU671X by SMEG.