MT2070 - Barcode Reader ZEBRA - Free user manual and instructions
Find the device manual for free MT2070 ZEBRA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rugged Handheld Barcode Reader |
| Model | MT2070 |
| Brand | Zebra |
| Dimensions (H x W x D) | 18.5 x 7.1 x 4.8 cm |
| Weight | Approx. 300 g |
| Power Source | Rechargeable Li-Ion battery (3.7V, 2200 mAh) |
| Battery Life | Up to 14 hours continuous scanning |
| Charging Time | Approx. 4 hours |
| Scan Engine | 1D/2D imager |
| Decode Capability | 1D, 2D, PDF417, QR, Data Matrix, etc. |
| Connectivity | Bluetooth 2.1 + EDR, USB 2.0 |
| Wireless Range | Up to 100 m (open area) |
| Drop Specification | Withstands multiple drops from 1.8 m to concrete |
| IP Rating | IP54 (dust and splash resistant) |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -40°C to 70°C |
| Decode Indicator | Green/Red LED, beeper, vibrator |
| Keypad | 23-key alphanumeric |
| Display | Monochrome LCD, 128x64 pixels, backlit |
| Cleaning Instructions | Use a soft cloth dampened with mild soap and water. Avoid solvents. |
| Safety Certification | CE, FCC, UL, RoHS |
| Spare Parts Available | Battery, charging cradle, cable, holster, screen protector |
| Warranty | 1 year standard (extendable) |
Frequently Asked Questions - MT2070 ZEBRA
How do I pair the MT2070 with Bluetooth?
Press and hold the Bluetooth button until the LED blinks blue. On your host device, search for 'MT2070' and select it. Enter PIN 0000 if prompted.
What barcodes can the MT2070 read?
It reads both 1D (UPC, EAN, Code 39, Code 128) and 2D (QR, Data Matrix, PDF417) barcodes.
How to clean the scanner?
Use a soft, lint-free cloth slightly dampened with water or mild soap. Do not use abrasive cleaners or solvents. Clean the scan window gently.
What is the battery life?
The rechargeable Li-Ion battery lasts up to 14 hours of continuous scanning. Charging time is approximately 4 hours.
Can I replace the battery myself?
Yes, the battery is user-replaceable. Slide the battery cover down, remove old battery, insert new one, and replace cover.
How do I perform a factory reset?
Turn off the scanner. Press and hold the Power + Scan buttons simultaneously for 10 seconds until the LED flashes red. Release buttons.
What to do if the scanner stops scanning?
Check battery charge and connection. Ensure the scan window is clean. If using Bluetooth, re-pair the device. Perform a cold boot by removing battery for 30 seconds.
Is the scanner water-resistant?
Yes, it has an IP54 rating, meaning it is protected against dust and splashing water. Do not submerge.
How to change the beeper volume?
Go to Menu > Settings > Audio. Adjust volume using the up/down keys. You can also mute or enable vibrator.
What accessories are available?
Available accessories include charging cradle, USB cable, holster, screen protector, and spare batteries.
User questions about MT2070 ZEBRA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Barcode Reader in PDF format for free! Find your manual MT2070 - ZEBRA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MT2070 by ZEBRA.
USER MANUAL MT2070 ZEBRA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ZEBRA
Model : MT2070
Category : Barcode Reader