DS-PEA101-V1 - Alarm system Hikvision - Free user manual and instructions
Find the device manual for free DS-PEA101-V1 Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wired Outdoor PIR Motion Detector |
| Model | DS-PEA101-V1 |
| Detection Range | 10 m (33 ft) at 90° |
| Power Supply | 12 VDC, 40 mA max |
| Alarm Output | NC, 100 mA max, 30 VDC |
| Tamper Protection | NC, 100 mA max, 30 VDC |
| Operating Temperature | -20 °C to +60 °C |
| Dimensions | 127 mm × 63 mm × 48 mm |
| Weight | 140 g (5 oz) |
| Mounting Height | 1.8 m to 2.5 m recommended |
| Pet Immunity | Up to 25 kg (55 lb) |
| Coverage Area | 85 m² (915 ft²) |
| Housing Material | ABS plastic, UV-resistant |
| Protection Rating | IP55 |
| Certifications | CE, FCC |
| Wiring | Screw terminals, max 1.5 mm² |
| LED Indicator | Red for alarm, green for power |
| Remote Control | Not supported (wired only) |
| Compatible Systems | Hikvision alarm panels and 12V control panels |
| Installation | Surface mount on wall or bracket |
| Maintenance | Clean lens with soft dry cloth; avoid chemicals |
| Spare Parts | Bracket, screws, and connector included; contact vendor for replacements |
Frequently Asked Questions - DS-PEA101-V1 Hikvision
What is the detection range of the Hikvision DS-PEA101-V1?
The detection range is up to 10 meters (33 feet) with a 90° field of view.
Is the DS-PEA101-V1 suitable for outdoor use?
Yes, it has an IP55 rating, making it weather-resistant and suitable for outdoor installation.
How do I wire the DS-PEA101-V1 to my alarm panel?
Use the screw terminals: connect NC (normally closed) for alarm output and TAMPER for tamper protection, along with 12 VDC power. Ensure wires are no thicker than 1.5 mm².
Can the DS-PEA101-V1 ignore pets?
Yes, it has pet immunity for animals up to 25 kg (55 lb) to reduce false alarms.
What is the recommended mounting height?
Mount the detector at a height of 1.8 m to 2.5 m for optimal coverage.
Does the DS-PEA101-V1 have a tamper switch?
Yes, it includes a tamper switch that triggers an alarm if the cover is opened or the device is removed from its mount.
What should I do if the LED is not working?
Check the power supply (12 VDC) and wiring. The red LED indicates alarm, green indicates power. If both are off, verify connections.
How do I clean the PIR lens?
Use a soft, dry cloth to gently wipe the lens. Avoid using water or chemical cleaners to prevent damage.
What is the coverage area of this detector?
The coverage area is approximately 85 m² (915 ft²) at the standard mounting height.
Is the DS-PEA101-V1 compatible with third-party alarm systems?
It can work with any alarm system that accepts 12 VDC and NC alarm inputs, but best compatibility is with Hikvision panels.
User questions about DS-PEA101-V1 Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Alarm system in PDF format for free! Find your manual DS-PEA101-V1 - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-PEA101-V1 by Hikvision.
USER MANUAL DS-PEA101-V1 Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-PEA101-V1
Category : Alarm system