12500 - Dehumidifier Draper - Free user manual and instructions
Find the device manual for free 12500 Draper in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Compressor Dehumidifier |
| Brand | Draper |
| Model | 12500 |
| Dimensions (W x D x H) | 48 x 35 x 60 cm |
| Weight | 13.5 kg |
| Power Supply | 220-240 V, 50 Hz |
| Power Consumption | 280 W |
| Dehumidification Capacity | 12 L/day (at 30°C, 80% RH) |
| Water Tank Capacity | 2.0 L |
| Refrigerant Type | R-134a |
| Operating Humidity Range | 30% - 80% RH |
| Operating Temperature Range | 5°C - 35°C |
| Airflow Rate | 120 m³/h |
| Noise Level | 45 dB(A) |
| Functions | Continuous, Auto, Turbo modes; Timer; Hygrostat |
| Continuous Drainage | Yes, via hose (not included) |
| Filter Type | Washable anti-dust filter |
| Maintenance | Clean filter every 2 weeks; empty tank or connect hose |
| Safety Features | Auto shut-off when tank full; overheat protection; child lock |
| Spare Parts Available | Filters, water tank, continuous drain adapter |
| Warranty | 2 years |
Frequently Asked Questions - 12500 Draper
How do I set the desired humidity level?
Press the Hygrostat button repeatedly until the desired humidity level (30% to 80%) is displayed on the screen. The dehumidifier will automatically stop when the room reaches that level.
What should I do when the water tank is full?
The unit will stop automatically and the Full Tank indicator will light up. Remove the tank, empty it, and reinsert it securely. The dehumidifier will resume operation.
Can I use a continuous drainage hose?
Yes. Remove the water tank, attach a standard garden hose (not included) to the continuous drain outlet at the back of the unit, and route the hose to a floor drain or sink. Ensure the hose is not kinked.
How often should I clean the air filter?
Clean the filter every 2 weeks under normal use. A dirty filter reduces efficiency. Remove the filter, wash it with mild detergent and water, dry it completely, and reinstall.
What is the 'Turbo' mode?
Turbo mode runs the fan at maximum speed for rapid dehumidification. It is suitable for very humid conditions. The mode can be activated by pressing the Speed button until 'Turbo' appears.
The dehumidifier is not collecting water. What's wrong?
Check if the room humidity is below the set level. Ensure the filter is clean. Verify that the unit is placed away from walls and obstructions. If the room temperature is below 5°C, the compressor may not run.
Is it normal for the dehumidifier to blow warm air?
Yes. The dehumidifier works like an air conditioner: it removes moisture and produces warm exhaust air. This is normal and helps raise the room temperature slightly.
How do I activate the child lock?
Press and hold the Lock button for 3 seconds. The lock icon will appear on the display, disabling all buttons except the power button. Repeat to unlock.
What does the timer function do?
You can set a timer to automatically turn the unit on or off after a specified time (1-24 hours). Press the Timer button and use +/- to set the hours.
Where can I find replacement parts?
Replacement parts such as filters, water tank, and drain adapter are available from Draper authorized dealers or online. Refer to the spare parts list in the manual for part numbers.
User questions about 12500 Draper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dehumidifier in PDF format for free! Find your manual 12500 - Draper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 12500 by Draper.
USER MANUAL 12500 Draper
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Draper
Model : 12500
Category : Dehumidifier