D20 55588 - Saw Draper - Free user manual and instructions
Find the device manual for free D20 55588 Draper in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Circular Saw |
| Brand | Draper |
| Model | D20 55588 |
| Power Source | Electric Corded |
| Rated Power | 1200 W |
| Blade Diameter | 190 mm |
| Max Cut Depth (90°) | 65 mm |
| Max Cut Depth (45°) | 45 mm |
| No-Load Speed | 5500 rpm |
| Weight | 4.2 kg |
| Dimensions (L x W x H) | 310 x 260 x 230 mm |
| Cable Length | 2.5 m |
| Bevel Capacity | 0° to 45° |
| Dust Extraction | Integrated dust port |
| Safety Features | Blade guard, safety switch, spindle lock |
| Maintenance | Regular blade cleaning and lubrication |
| Spare Parts Availability | Blades, carbon brushes, power cord |
| Repairability | User serviceable parts (brushes, blade) |
| Warranty | 2 years |
Frequently Asked Questions - D20 55588 Draper
How do I change the blade on the Draper D20 55588 saw?
First, unplug the saw. Use the spindle lock to hold the blade, then loosen the arbor nut with the supplied wrench. Remove the old blade and install the new one, ensuring the teeth face the correct direction. Tighten the nut securely.
What type of blade is compatible with this saw?
The Draper D20 55588 uses a 190 mm blade with a 20 mm arbor. Ensure the blade is rated for at least 5500 rpm and is suitable for the material you intend to cut.
Can I use the saw for bevel cuts?
Yes, the saw has a bevel capacity of 0° to 45°. Adjust the bevel angle by loosening the bevel lever, setting the desired angle, and tightening it again.
How do I adjust the cutting depth?
Loosen the depth adjustment lever, move the base plate up or down to set the desired depth, and tighten the lever. The maximum depth at 90° is 65 mm.
What should I do if the saw blade stops spinning?
Check if the blade is jammed or the motor is overloaded. Unplug the saw and free any obstruction. If the problem persists, inspect the carbon brushes for wear and replace if necessary.
How often should I clean the dust extraction port?
Clean the dust port after each use to maintain efficient dust collection. Use a brush or compressed air to remove debris from the port and the saw body.
Is it safe to use the saw outdoors?
Yes, but only if the weather is dry and the saw is connected to a ground fault circuit interrupter (GFCI) outlet. Avoid using in wet conditions to reduce the risk of electric shock.
What materials can I cut with this saw?
The saw is designed for cutting wood, plywood, and soft materials. For metal or masonry, use appropriate blades and reduce cutting speed.
How do I replace the carbon brushes?
Unplug the saw. Locate the brush caps on the motor housing, unscrew them, and remove the worn brushes. Insert new brushes, ensuring they seat properly, and replace the caps.
What does the warranty cover?
The standard warranty covers manufacturing defects for 2 years from the date of purchase. It does not cover wear and tear, misuse, or damage from improper maintenance.
User questions about D20 55588 Draper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual D20 55588 - Draper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. D20 55588 by Draper.
USER MANUAL D20 55588 Draper
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Draper
Model : D20 55588
Category : Saw