57681 - Sander Draper - Free user manual and instructions
Find the device manual for free 57681 Draper in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Orbital Sander |
| Brand | Draper |
| Model | 57681 |
| Power Supply | 230 V, 50 Hz |
| Power Consumption | 250 W |
| No-Load Speed | 12,000 rpm |
| Sanding Base Size | 125 mm (round) |
| Orbit Diameter | 2.0 mm |
| Dust Extraction | Yes, with dust bag |
| Dimensions (L x W x H) | 200 x 120 x 150 mm |
| Weight | 1.5 kg |
| Sound Pressure Level | 78 dB(A) |
| Sound Power Level | 89 dB(A) |
| Vibration Level | 5.0 m/s² |
| Protection Class | Double insulated (Class II) |
| Lock-On Button | Yes |
| Sanding Sheet Attachment | Hook and loop (Velcro) |
| Accessories Included | Dust bag, 3 sanding sheets (80, 120, 240 grit) |
| Maintenance | Clean dust port regularly, replace worn sandpaper |
| Spare Parts Available | Sanding sheets, dust bag, carbon brushes |
Frequently Asked Questions - 57681 Draper
How do I change the sanding sheet on the Draper 57681 sander?
The sanding sheet is attached via hook and loop (Velcro). Simply peel off the old sheet and press on a new one of the same size (125 mm round). Ensure the holes align with the dust extraction holes.
Can I use the sander with a vacuum cleaner for dust extraction?
Yes, the sander has a dust port that can be connected to a vacuum hose (typically 35 mm diameter). Remove the dust bag and attach the vacuum adapter if available.
What grit sandpaper should I use for removing paint?
For heavy paint removal, start with a coarse grit like 40 or 60. For finer finishing, progress to 120 or 240 grit. Always test on a small area first.
Why does my sander vibrate excessively?
Excessive vibration may indicate a worn sanding sheet, unbalanced paper, or debris inside the base. Check the sandpaper is properly attached and clean the base. If problem persists, inspect the bearing.
How do I clean the dust bag?
Empty the dust bag after each use. For deeper cleaning, wash the bag with mild soap and water, then let it dry completely before reattaching. Do not use harsh chemicals.
What is the correct speed for sanding wood?
The Draper 57681 has a fixed speed of 12,000 rpm. This is suitable for most wood sanding tasks. For softer woods, use finer grit to avoid gouging.
Can I use the sander for wet sanding?
No, this sander is designed for dry sanding only. Wet sanding can damage the electrical components and void the warranty.
How do I replace the carbon brushes?
Unplug the sander. Remove the brush caps on the sides (usually screwdriver required). Take out the old brushes and insert new ones (same size). Reinstall caps. Run the sander for a few minutes to seat brushes.
What does the lock-on button do?
The lock-on button allows continuous operation without holding the trigger. Press the trigger, then push the lock-on button; release trigger. To stop, press trigger again.
Is this sander suitable for drywall sanding?
Yes, it can be used for drywall sanding but will produce fine dust. Use a vacuum extraction and wear a dust mask. Keep the sander moving to avoid gouging.
User questions about 57681 Draper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sander in PDF format for free! Find your manual 57681 - Draper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 57681 by Draper.
USER MANUAL 57681 Draper
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Draper
Model : 57681
Category : Sander