Hydroxinator iQ PRO - Uncategorized ZODIAC - Free user manual and instructions
Find the device manual for free Hydroxinator iQ PRO ZODIAC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Salt Chlorinator (Hydrolysis System) |
| Brand | Zodiac |
| Model | Hydroxinator iQ PRO |
| Dimensions (L x W x H) | 35 x 25 x 20 cm |
| Weight | 5.5 kg |
| Power Supply | 230 V AC, 50/60 Hz |
| Power Consumption | 200 W |
| Maximum Flow Rate | 12 m³/h |
| Salt Level Required | 4 - 6 g/L |
| Cell Type | Titanium with ruthenium coating |
| Cell Warranty | 3 years |
| Control Interface | Touchscreen with iQ connectivity |
| Functions | Chlorine production, super chlorination, self-cleaning cycle, flow detection |
| Display | LCD with real-time chlorine output and salinity |
| Protection Class | IPX4 (splash-proof) |
| Safety Features | Auto shut-off on low flow or overcurrent, thermal protection |
| Maintenance | Quarterly cleaning of cell with mild acid solution |
| Spare Parts Available | Replacement cell, o-rings, flow switch, power supply board |
| Repairability | Modular design with user-replaceable cell and electronics |
| Compatible Pool Sizes | Up to 75 m³ |
| Warranty (Controller) | 2 years |
Frequently Asked Questions - Hydroxinator iQ PRO ZODIAC
How do I install the Hydroxinator iQ PRO?
Install the cell after the filter and before any heater or dispenser. Ensure the flow direction arrow matches the pipe flow. Connect the controller to power and communication cable. For full details, consult the installation manual.
What salt level should I maintain?
Maintain a salt level between 4 and 6 g/L (4000-6000 ppm). Use a salt test kit to verify. Low salt reduces chlorine production; high salt may cause overcurrent.
How often do I need to clean the cell?
Clean the cell every 3 months or when signs of scaling appear. Use a 4:1 water to muriatic acid solution, soak for 5-10 minutes, then rinse.
The device shows 'No Flow' error. What should I do?
Check that the pump is running and the filter is not clogged. Ensure the flow switch is correctly installed. If error persists, inspect the flow switch for debris or damage.
Can I use the Hydroxinator iQ PRO with saltwater pools?
Yes, it is designed specifically for saltwater pools. It converts salt into chlorine through electrolysis. Do not use with freshwater or other chemicals.
How do I adjust chlorine output?
Use the touchscreen to set the desired chlorine production percentage (0-100%). The iQ system automatically adjusts based on water temperature and flow.
What does the 'Self-Cleaning' cycle do?
The self-cleaning cycle reverses polarity to remove calcium deposits from the cell. Run it weekly for best performance. It can be activated manually or set on a timer.
Is the device compatible with variable speed pumps?
Yes, it works with variable speed pumps. Ensure the flow rate stays above 4 m³/h to activate the flow switch correctly.
What spare parts are available?
Replacement cell (part number R1234), o-ring kit, flow switch, and power supply board are available from Zodiac dealers. Always use genuine parts.
How do I connect to the Zodiac iQ app?
Download the Zodiac iQ app on your smartphone. Follow the pairing instructions in the manual to connect via Bluetooth or Wi-Fi. You can monitor and control the device remotely.
User questions about Hydroxinator iQ PRO ZODIAC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Hydroxinator iQ PRO - ZODIAC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Hydroxinator iQ PRO by ZODIAC.
USER MANUAL Hydroxinator iQ PRO ZODIAC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ZODIAC
Model : Hydroxinator iQ PRO
Category : Uncategorized