FZS 3004-B - String Trimmer Fieldmann - Free user manual and instructions
Find the device manual for free FZS 3004-B Fieldmann in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Grass Trimmer |
| Brand | Fieldmann |
| Model | FZS 3004-B |
| Power Source | Electric (corded) |
| Power | 600 W |
| Voltage | 230 V ~ 50 Hz |
| No-load Speed | 8000 rpm |
| Cutting Width | 30 cm |
| Line Diameter | 1.4 mm |
| Line Feed System | Tap & Go |
| Weight | 2.5 kg |
| Cable Length | 0.5 m |
| Sound Pressure Level (LpA) | 96 dB(A) |
| Vibration Level | 2.5 m/s² |
| Protection | Double insulation |
| Handle Design | Rear handle |
| Starting System | Push button |
| Cutting Line Type | Nylon |
| Spool Capacity | 6 m of line |
| Maintenance | Clean with dry cloth, check line wear |
| Spare Parts | Spool with line, guard, screws |
| Repairability | User-replaceable line and spool |
| Package Contents | Trimmer, spool, guard, manual |
| Certifications | CE, EAC |
Frequently Asked Questions - FZS 3004-B Fieldmann
How do I replace the cutting line?
Unplug the trimmer. Press the tabs on the spool housing and remove the spool. Take out the old line, wind the new nylon line onto the spool in the direction of arrows, leaving 15 cm exposed. Reinsert the spool and thread the line through the eyelet.
What type of line should I use?
Use a 1.4 mm diameter nylon line. Thicker or thinner lines may cause poor performance or damage.
How do I start the trimmer?
Ensure the trimmer is plugged into a power outlet. Press and hold the safety lock button on the handle, then squeeze the trigger switch. Release the safety lock once running.
Why does the line not feed automatically?
Common causes: the line is too short, the spool is wound incorrectly, or the Tap & Go mechanism is jammed. Tap the spool on the ground while the trimmer is running to release more line. If it doesn't work, check and rewind the spool.
Can I use this trimmer as an edger?
No, the Fieldmann FZS 3004-B is designed for grass trimming only. It does not have an edging function or adjustable head for vertical cutting.
How should I clean the trimmer after use?
Unplug the trimmer. Wipe the housing with a dry cloth. Remove grass clippings from the guard and spool area using a brush. Do not use water or solvents.
What safety precautions should I take?
Always wear safety glasses and sturdy shoes. Keep bystanders away. Never operate without the guard. Inspect the power cord for damage before use. Disconnect when not in use.
The trimmer vibrates excessively during operation. What should I do?
Check if the cutting head is balanced or if the line is evenly wound. Also inspect for loose screws or damage. Stop immediately if vibration is severe and contact service.
How should I store the trimmer?
Clean it thoroughly. Store in a dry place out of reach of children. Coil the power cord loosely. Avoid storing near heat sources or moisture.
Is the Fieldmann FZS 3004-B suitable for heavy weeds?
It is designed for light to medium grass and weeds. For thick, woody weeds, consider a brush cutter. Overloading may cause motor damage.
User questions about FZS 3004-B Fieldmann
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your String Trimmer in PDF format for free! Find your manual FZS 3004-B - Fieldmann and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FZS 3004-B by Fieldmann.
USER MANUAL FZS 3004-B Fieldmann
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Fieldmann
Model : FZS 3004-B
Category : String Trimmer