Vista II IN0048ST - Projector INFOCUS - Free user manual and instructions
Find the device manual for free Vista II IN0048ST INFOCUS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | InFocus |
| Model | Vista II IN0048ST |
| Product Type | Short Throw Projector |
| Display Technology | DLP |
| Resolution | WXGA (1280 x 800) |
| Brightness | 3000 ANSI Lumens |
| Contrast Ratio | 20000:1 |
| Throw Ratio | 0.49:1 |
| Lamp Life (Normal) | 5000 hours |
| Lamp Life (Eco) | 6000 hours |
| Built-in Speaker | 10W (mono) |
| Inputs | HDMI, VGA, Composite, S-Video, Audio 3.5mm |
| Outputs | VGA, Audio 3.5mm |
| Control | RS-232, IR Remote |
| 3D Support | Yes (DLP Link) |
| Dimensions (W x D x H) | 285 x 210 x 85 mm |
| Weight | 2.5 kg |
| Power Consumption | 260W (max) |
| Power Supply | 100-240V AC, 50-60Hz |
| Noise Level | 30 dB (Eco mode) |
| Keystone Correction | Vertical ±40° |
| Air Filter | Replaceable (clean every 500 hours) |
| Lamp Type | 240W P-VIP |
| Warranty | 3 years (lamp 90 days) |
Frequently Asked Questions - Vista II IN0048ST INFOCUS
How do I set up the InFocus Vista II IN0048ST projector?
Place the projector on a stable surface, connect the power cord and your video source using HDMI or VGA. Adjust the focus and keystone using the lens ring or menu. Refer to the Quick Start Guide for detailed steps.
What is the optimal projection distance for a 100-inch screen?
With a throw ratio of 0.49:1, the projector needs to be about 1.1 meters from the screen to project a 100-inch diagonal image.
How do I clean the air filter?
Turn off and unplug the projector. Locate the filter cover on the side, remove the filter, and gently vacuum or wash with mild soap. Dry completely before reinstalling. Clean every 500 hours of use.
How do I replace the lamp?
Allow the projector to cool for at least 60 minutes. Remove the lamp cover screw, slide out the old lamp module, insert the new one (InFocus SP-LAMP-V2), and replace the cover. Reset the lamp timer in the menu.
Why is the projector overheating?
Check if the air filter is clogged, ensure ventilation openings are clear, and verify the fan is running. Reduce ambient temperature or use Eco mode. If persistent, contact support.
Can I connect a gaming console?
Yes, connect via HDMI. The projector supports resolutions up to 1920x1200. For best performance, set the console output to 720p or 1080p.
How do I enable 3D mode?
Go to the menu, select Display > 3D, and set to DLP Link. Use compatible 3D glasses. Ensure the source is 3D capable (e.g., 120Hz 3D ready signal).
What does the LED status indicator mean?
Solid blue: normal operation. Blinking blue: standby. Solid red: overheating or lamp error. Blinking red: power supply issue. Refer to the manual for troubleshooting codes.
Is the projector suitable for a small room?
Yes, the short throw lens allows large images from a short distance, ideal for small spaces. Minimum projection distance is 0.5 meters for about 40 inches.
Where can I find spare parts?
Authorized InFocus dealers or online stores. Common parts: lamp (SP-LAMP-V2), air filter, remote control. Check the InFocus support page for certified suppliers.
User questions about Vista II IN0048ST INFOCUS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual Vista II IN0048ST - INFOCUS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Vista II IN0048ST by INFOCUS.
USER MANUAL Vista II IN0048ST INFOCUS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : INFOCUS
Model : Vista II IN0048ST
Category : Projector