PA692A - Uncategorized Unitech - Free user manual and instructions
Find the device manual for free PA692A Unitech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rugged PDA |
| Model | PA692A |
| Brand | Unitech |
| Operating System | Windows Embedded Handheld 6.5 / Android (optional) |
| Processor | Marvell PXA320 806 MHz |
| Memory | 256 MB RAM / 512 MB Flash |
| Display | 3.5-inch TFT LCD, 320x480 pixels, touchscreen |
| Barcode Scanner | 1D/2D imager (optional) |
| Wireless Connectivity | Wi-Fi 802.11 b/g, Bluetooth 2.1, GPS |
| Dimensions | 190 x 80 x 45 mm (7.5 x 3.1 x 1.8 in) |
| Weight | Approx. 400 g (14.1 oz) with battery |
| Battery | Rechargeable Li-ion 3.7V, 3100 mAh |
| Input Method | Keypad (numeric/alpha) and touchscreen |
| IP Rating | IP54 (dust and splash resistant) |
| Drop Specification | 1.2 m (4 ft) onto concrete |
| Expansion Slot | MicroSD card slot |
| Camera | 3.2 megapixel with autofocus and LED flash |
| Audio | Speaker, microphone, headphone jack |
| Interface | USB 2.0, RS232 (via cradle) |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Regulatory Approvals | CE, FCC, RoHS |
| Accessories Included | Battery, hand strap, stylus, charging cradle |
Frequently Asked Questions - PA692A Unitech
How do I perform a factory reset on the Unitech PA692A?
Press and hold the Power and Scan buttons simultaneously for about 5 seconds until the device vibrates and resets. Alternatively, go to Settings > System > Factory Reset.
Can I upgrade the operating system on the PA692A?
The PA692A originally runs Windows Embedded Handheld 6.5. Some units may support an upgrade to Windows Mobile 6.5.3 or Android, but this requires official firmware from Unitech. Contact support for details.
How do I replace the battery on the PA692A?
Remove the hand strap, then slide the battery cover down and lift it off. Disconnect the old battery and insert the new one (Unitech model BAT-3100). Reattach the cover and hand strap.
What barcode symbologies does the scanner support?
The optional 1D/2D imager supports common symbologies including UPC/EAN, Code 128, Code 39, PDF417, Data Matrix, and QR Code. Full list is in the user manual.
How to connect the PA692A to Wi-Fi?
Go to Start > Settings > Connections > Wi-Fi. Enable Wi-Fi, scan for networks, select yours, and enter the password. The device supports 802.11 b/g.
Is the PA692A waterproof?
No, it is not waterproof. It has an IP54 rating, meaning it is dust-protected and can withstand splashes of water. Do not submerge or expose to heavy rain.
How to calibrate the touchscreen?
Tap Start > Settings > System > Screen > Align Screen. Follow the crosshair prompts to recalibrate.
What is the maximum SD card capacity supported?
The PA692A supports microSD cards up to 32 GB (SDHC). Higher capacity cards (SDXC) may not be recognized.
How to clean the PA692A?
Turn off the device and remove the battery. Use a soft, lint-free cloth slightly dampened with water or mild soap. Avoid abrasive cleaners or solvents. Dry thoroughly before powering on.
Where can I download the user manual for the Unitech PA692A?
The manual is available for free on notice-facile.com in PDF format. You can also visit the Unitech support website for additional documentation and drivers.
User questions about PA692A Unitech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual PA692A - Unitech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PA692A by Unitech.
USER MANUAL PA692A Unitech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Unitech
Model : PA692A
Category : Uncategorized