ProDesk 2 Tower G1i - Desktop computer HP - Free user manual and instructions
Find the device manual for free ProDesk 2 Tower G1i HP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Desktop Computer |
| Brand | HP |
| Model | ProDesk 2 Tower G1i |
| Processor | Intel Core i5 (4th Gen) up to 3.4 GHz |
| Memory | 4GB DDR3-1600 MHz (expandable to 16GB) |
| Storage | 500GB 7200 RPM SATA HDD |
| Graphics | Integrated Intel HD Graphics 4600 |
| Operating System | Windows 7 Professional (64-bit) |
| Dimensions (W x D x H) | 15.5 x 6.5 x 17.5 inches (39.4 x 16.5 x 44.5 cm) |
| Weight | 15.5 lbs (7.0 kg) |
| Power Supply | 300W internal power supply |
| Front Ports | 2x USB 3.0, 1x headphone, 1x microphone |
| Rear Ports | 4x USB 2.0, 1x VGA, 2x DisplayPort, 1x RJ-45 Ethernet, line-in/out |
| Expansion Slots | 1x PCIe x16, 1x PCIe x1, 1x PCI |
| Drive Bays | 1x 3.5" internal, 1x 5.25" external |
| Security | TPM 1.2, Kensington lock slot, chassis intrusion switch |
| Maintenance | Tool-less access panel, user-accessible upgrades |
| Energy Star | Yes |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - ProDesk 2 Tower G1i HP
How do I upgrade the RAM in my HP ProDesk 2 Tower G1i?
To upgrade RAM: 1) Shut down and unplug the PC. 2) Press the release button on the side panel to open. 3) Locate the two DIMM slots on the motherboard. 4) Push down the clips on the existing module, or insert new DDR3-1600 MHz modules. 5) Ensure they click into place. 6) Close the panel and power on. Maximum supported memory is 16GB (2x8GB).
How do I reset the BIOS to factory defaults?
To reset BIOS: 1) Restart the computer. 2) Press F10 repeatedly during boot to enter BIOS Setup. 3) Select 'Restore Defaults' (usually F9 or an option). 4) Confirm and select 'Exit Saving Changes'. Alternatively, remove the CMOS battery (CR2032) for 30 seconds, then reinstall.
How do I clean the interior of my HP ProDesk 2 Tower G1i?
First, turn off and unplug the PC. Open the side panel. Use compressed air to blow out dust from fans, heatsinks, and vents. Hold fans stationary while blowing to prevent damage. Wipe surfaces with a lint-free cloth. Do not use liquids. Close the panel and reconnect.
Can I connect two monitors to this PC?
Yes, the HP ProDesk 2 Tower G1i supports dual monitors via the integrated Intel HD Graphics. Connect one monitor to the VGA port and the other to a DisplayPort. Use appropriate cables (VGA cable and DisplayPort cable). You may need a DisplayPort-to-HDMI adapter if your monitor uses HDMI.
What is the maximum RAM capacity?
The maximum supported RAM is 16 GB using two 8 GB DDR3-1600 MHz modules. The motherboard has two DIMM slots. Ensure you use unbuffered, non-ECC memory for compatibility.
Is this desktop compatible with Linux?
Yes, the HP ProDesk 2 Tower G1i is compatible with most Linux distributions. Intel graphics and networking are well-supported. You may need to enable legacy boot or disable secure boot in BIOS. Common distributions like Ubuntu, Fedora, and Debian work out of the box.
How do I replace the hard drive?
1) Power off and unplug. 2) Remove side panel. 3) Locate the 3.5-inch hard drive cage. 4) Unplug the SATA data and power cables. 5) Press the release tabs to slide the drive out. 6) Install new drive in the cage, connect cables, and close the PC. You may need to reinstall the operating system.
Where can I find drivers for Windows 10?
HP provides drivers for Windows 10 on the official HP Support website. Go to support.hp.com, enter your model 'HP ProDesk 2 Tower G1i', and select your OS. Download and install chipset, audio, graphics, and network drivers as needed. Alternatively, use HP Support Assistant.
Can I upgrade the power supply?
Yes, the 300W power supply can be replaced with a standard ATX PSU. The unit uses a proprietary motherboard connector, but adapters are available. For safety, choose a PSU with similar or higher wattage (e.g., 400W). Ensure physical dimensions fit the chassis.
How do I enter the boot menu?
To enter the boot menu on the HP ProDesk 2 Tower G1i, restart the computer and press F9 repeatedly during the HP splash screen. This opens the One-Time Boot Menu where you can select a device to boot from (e.g., USB, DVD, hard drive).
User questions about ProDesk 2 Tower G1i HP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Desktop computer in PDF format for free! Find your manual ProDesk 2 Tower G1i - HP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ProDesk 2 Tower G1i by HP.
USER MANUAL ProDesk 2 Tower G1i HP
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HP
Model : ProDesk 2 Tower G1i
Category : Desktop computer