F-1002MAJ-C - Ice machine Hoshizaki - Free user manual and instructions
Find the device manual for free F-1002MAJ-C Hoshizaki in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Ice Machine |
| Brand | Hoshizaki |
| Model | F-1002MAJ-C |
| Ice Shape | Crescent Cube |
| Ice Production | Approximately 1000 lbs (454 kg) per 24 hours |
| Storage Bin Capacity | 220 lbs (100 kg) built-in storage bin |
| Dimensions (W x D x H) | 30 x 30 x 40 inches (762 x 762 x 1016 mm) |
| Net Weight | 200 lbs (91 kg) |
| Power Supply | 115 V, 60 Hz, 1-phase |
| Electric Consumption | 10 amps (max) |
| Refrigerant Type | R-404A |
| Condenser Type | Air-cooled |
| Water Connection | 1/4 inch flare, 10–80 psi water pressure |
| Drain Connection | 3/4 inch female pipe |
| Construction Material | Stainless steel exterior and evaporator |
| Self-Cleaning Function | Automatic periodic cleaning cycle |
| Safety Features | High-pressure cut-off, low water shut-off |
| Included Accessories | Ice scoop, water filter, installation kit |
| Warranty | 3 years parts and labor |
| Certifications | ETL, NSF |
Frequently Asked Questions - F-1002MAJ-C Hoshizaki
How much ice does the F-1002MAJ-C produce per day?
The Hoshizaki F-1002MAJ-C produces approximately 1000 lbs (454 kg) of crescent cubes per 24 hours under standard conditions.
What are the electrical requirements for this ice machine?
It requires a 115 V, 60 Hz, 15 amp dedicated circuit with a standard NEMA 5-15 plug.
How do I clean the ice machine?
Use the built-in cleaning cycle with a recommended Hoshizaki cleaner. Run the cycle, then rinse thoroughly. Refer to the manual for step-by-step instructions.
What type of water connection is needed?
A 1/4 inch flare water supply line with a shut-off valve, providing 10–80 psi (0.7–5.5 bar) water pressure.
How often should I clean the condenser?
Clean the air-cooled condenser every 3 months using a soft brush or vacuum to remove dust and debris.
What does the error code E1 mean?
Error code E1 indicates a high-pressure switch trip. Check for blocked condenser, high ambient temperature, or refrigerant issues.
Can I adjust the ice thickness?
Yes, the ice thickness can be adjusted via the control board dip switches or menu settings. Refer to the manual for specific adjustments.
What is the recommended water filter?
Hoshizaki recommends using a Hoshizaki water filter (e.g., WH-85) to reduce scale and improve ice quality.
How do I winterize the machine if not in use?
Drain all water from the system, blow out lines with compressed air, and store in a temperature-controlled area above freezing.
Where can I find replacement parts?
Replacement parts are available through authorized Hoshizaki dealers or the Hoshizaki parts website using your model number.
User questions about F-1002MAJ-C Hoshizaki
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Ice machine in PDF format for free! Find your manual F-1002MAJ-C - Hoshizaki and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. F-1002MAJ-C by Hoshizaki.
USER MANUAL F-1002MAJ-C Hoshizaki
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hoshizaki
Model : F-1002MAJ-C
Category : Ice machine