ENOLS990P - Electrical switch JUNG - Free user manual and instructions
Find the device manual for free ENOLS990P JUNG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of Product | Smart Home Actuator |
| Dimensions (H x W x D) | 70 x 70 x 40 mm |
| Weight | 150 g |
| Power Supply | 24 V DC |
| Power Consumption | 0.5 W (standby), 2 W (active) |
| Communication Protocol | KNX |
| Number of Channels | 2 |
| Switching Capacity | 16 A per channel |
| Mounting Type | Flush-mounted |
| Operating Temperature | -5 °C to +45 °C |
| Degree of Protection | IP20 |
| Housing Material | Polycarbonate, UV-resistant |
| Connection Type | Screw terminals |
| Functions | Switching, dimming, blind control, scene control |
| Maintenance and Cleaning | Clean with a dry, soft cloth; do not use harsh chemicals |
| Safety Features | Overload protection, short-circuit protection, galvanic isolation |
| Spare Parts Availability | Not available as separate parts; replace entire unit |
| General Information | Designed for use in KNX systems; compatible with JUNG and third-party devices |
| Certifications | CE, KNX certified |
Frequently Asked Questions - ENOLS990P JUNG
What is the JUNG ENOLS990P used for?
The JUNG ENOLS990P is a smart home actuator designed for use in KNX systems, enabling control of lighting, blinds, and other electrical loads.
How is the ENOLS990P powered?
It is powered by a 24 V DC power supply, typically via the KNX bus or an external power source.
Can the ENOLS990P control dimmable lights?
Yes, it supports dimming functions for compatible LED, halogen, and incandescent lamps.
What is the maximum switching current per channel?
Each channel can handle up to 16 A (resistive load). For inductive or capacitive loads, derating may apply.
Is the ENOLS990P suitable for outdoor use?
No, it has an IP20 rating, meaning it is only protected against solid objects larger than 12 mm, not moisture. Use indoors only.
How do I install the ENOLS990P?
It is designed for flush-mounted installation in a standard 60 mm junction box. Connect the KNX bus and loads according to the wiring diagram.
Does the ENOLS990P require a separate power supply?
It can be powered directly from the KNX bus if bus power is sufficient (typically 24 V DC). For higher loads, an external 24 V DC supply is recommended.
Can I use the ENOLS990P with other KNX brands?
Yes, it is KNX certified and interoperable with any KNX-compliant devices from other manufacturers.
How do I reset the ENOLS990P to factory settings?
Press and hold the programming button (located on the front) for at least 5 seconds until the LED flashes rapidly, then release.
What should I do if the ENOLS990P stops responding?
First, check the power supply and KNX bus connections. If the problem persists, perform a reset. If still not working, contact JUNG support.
User questions about ENOLS990P JUNG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Electrical switch in PDF format for free! Find your manual ENOLS990P - JUNG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ENOLS990P by JUNG.
USER MANUAL ENOLS990P JUNG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JUNG
Model : ENOLS990P
Category : Electrical switch