75664593 - Thermostat HAGER - Free user manual and instructions
Find the device manual for free 75664593 HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Residual Current Device (RCD) |
| Model | 75664593 |
| Brand | Hager |
| Rated Voltage | 230/400V AC |
| Rated Current | 40A |
| Residual Current Sensitivity | 30mA |
| Number of Poles | 2 |
| Mounting | DIN Rail |
| Width in Modules | 2 (36 mm) |
| Height | 85 mm |
| Depth | 70 mm |
| Weight | 0.15 kg |
| Frequency | 50/60 Hz |
| Protection Degree | IP20 |
| Standard | IEC 61008 |
| Operating Temperature | -5°C to 40°C |
| Terminal Capacity | 1-25 mm² |
| Functions | Earth leakage protection, overload protection |
| Maintenance | Monthly test, clean with dry cloth |
| Safety | Suitable for residential and commercial installations |
| Spare Parts | Not user-serviceable; replace unit |
Frequently Asked Questions - 75664593 HAGER
Why does my RCD trip frequently?
Frequent tripping may indicate a leakage current in your circuit, often caused by faulty appliances, moisture, or wiring issues. Check each appliance by unplugging them one by one and resetting the RCD. If the problem persists, consult an electrician.
How do I test the RCD?
Press the test button (marked 'T') on the device monthly. The RCD should immediately trip, cutting off power. Reset it by flipping the switch back to 'ON'. If it does not trip, the device may be faulty and should be replaced.
What is the difference between RCD and MCB?
An RCD (Residual Current Device) protects against earth leakage currents that can cause electric shock. An MCB (Miniature Circuit Breaker) protects against overloads and short circuits. Many devices combine both functions in an RCBO.
Can I install this device myself?
Installation should only be performed by a qualified electrician due to the risk of electric shock and compliance with local regulations. Incorrect installation can lead to fire or electrocution.
What does the test button do?
The test button simulates an earth leakage fault to verify that the RCD mechanism works correctly. It should be used monthly to ensure protection is operational.
What are the dimensions of the Hager 75664593?
The device has a width of 36 mm (2 DIN modules), a height of 85 mm, and a depth of 70 mm, making it suitable for standard distribution boards.
Is this RCD compatible with my electrical panel?
It is designed for DIN rail mounting in standard distribution boards. Check the rated voltage and current of your panel to ensure compatibility. The 40A rating is typical for main switch or subcircuit protection.
How do I reset it after a trip?
First, identify and resolve the cause of the trip. Then push the switch firmly to the 'ON' position. If it trips again immediately, there may be a persistent fault or a defective device.
What does the rating 30mA mean?
The 30mA sensitivity means the RCD will trip if it detects a leakage current greater than 30 milliamps, which is the standard for personal protection against electric shock.
How long does the RCD last?
With proper use and monthly testing, an RCD typically lasts 10-15 years. However, if it becomes sluggish or fails the test, it should be replaced immediately.
User questions about 75664593 HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Thermostat in PDF format for free! Find your manual 75664593 - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 75664593 by HAGER.
USER MANUAL 75664593 HAGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAGER
Model : 75664593
Category : Thermostat