DS-KIS702Y - Intercom Hikvision - Free user manual and instructions
Find the device manual for free DS-KIS702Y Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video Intercom Indoor Monitor |
| Brand | Hikvision |
| Model | DS-KIS702Y |
| Display Size | 7-inch TFT LCD |
| Resolution | 1024 × 600 pixels |
| Dimensions (Indoor Monitor) | 220 mm × 152 mm × 24 mm |
| Weight (Indoor Monitor) | 0.6 kg |
| Power Supply | 12 V DC (via adapter or PoE) |
| Power Consumption | ≤ 12 W |
| Main Functions | Two-way audio, video call, door lock release, monitoring, SIP intercom |
| Audio | Built-in microphone and speaker, echo cancellation |
| Video Compression | H.264 |
| Network | 10/100 Mbps Ethernet, Wi-Fi (optional) |
| Protocols | TCP/IP, SIP, RTSP |
| Storage | 8 GB internal storage, supports microSD up to 128 GB |
| Number of Door Stations Supported | Up to 4 |
| Maintenance | Clean with soft dry cloth; avoid liquids and abrasives |
| Safety | CE, FCC, RoHS compliant; overcurrent protection |
| Spare Parts / Repairability | Replacement power adapter, wall mount bracket, screws |
| General Information | Indoor use only; operating temperature 0°C to +40°C |
Frequently Asked Questions - DS-KIS702Y Hikvision
How do I connect the DS-KIS702Y to my door station?
Connect the indoor monitor to the door station via a 2-wire bus or Ethernet cable. Refer to the wiring diagram in the manual. Power on the monitor and door station, then pair them using the monitor's settings menu.
Can I view the camera feed on my smartphone?
Yes, download the Hik-Connect app and add the device using its serial number. Ensure the monitor is connected to your home network.
What should I do if the touchscreen is unresponsive?
First, restart the device by unplugging and replugging the power. If the issue persists, perform a factory reset via the settings menu or use a pin to press the reset button.
How do I adjust the volume of the intercom?
During a call, use the volume buttons on the side of the monitor, or go to Settings > Audio to adjust ringtone and conversation volume.
Does the DS-KIS702Y support Wi-Fi?
The standard model uses wired Ethernet. An optional Wi-Fi module may be available; check your specific version. For wireless connectivity, use a Wi-Fi bridge.
Can I connect more than one indoor monitor?
Yes, you can add up to three additional monitors. They all need to be on the same network and configured in the system settings.
How do I record video from the door station?
Insert a microSD card into the monitor. Go to Settings > Storage and enable recording. You can view recordings in the monitor's playback menu.
What is the operating temperature range?
The indoor monitor operates from 0°C to +40°C. Avoid placing it in direct sunlight or near heat sources.
How do I reset the password?
Press and hold the reset button (small hole) for 10 seconds until the device restarts. Then use the default credentials (admin/12345) and set a new password.
Can I integrate this intercom with a smart home system?
The DS-KIS702Y supports SIP protocol, so it can integrate with some smart home platforms. Use an automation bridge or API. Check Hikvision's official compatibility list.
User questions about DS-KIS702Y Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Intercom in PDF format for free! Find your manual DS-KIS702Y - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-KIS702Y by Hikvision.