ADC70W - Tumble drier ALTUS - Free user manual and instructions
Find the device manual for free ADC70W ALTUS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tumble dryer |
| Brand | Altus |
| Model | ADC70W |
| Loading Type | Front-load |
| Drying Capacity | 7 kg |
| Dimensions (H x W x D) | 850 x 596 x 598 mm |
| Weight | 35 kg |
| Power Supply | 220-240 V, 50 Hz |
| Power Consumption | 2000 W |
| Energy Class | C |
| Drying System | Condenser |
| Number of Programs | 15 |
| Display | LED |
| Delay Start | Yes, up to 24 hours |
| Lint Filter | Removable, clean after each use |
| Water Tank | 3.5 L, removable |
| Child Lock | Yes |
| Noise Level | 65 dB(A) |
| Built-in Light | Yes |
| Self-Cleaning Condenser | No |
| Reverse Tumbling | Yes |
| End of Cycle Signal | Audible |
| Door Opening | Left hinge (reversible) |
Frequently Asked Questions - ADC70W ALTUS
How do I clean the lint filter on my Altus ADC70W dryer?
Open the door and pull out the lint filter located at the bottom of the door opening. Use a soft brush or vacuum to remove lint. Rinse under water if needed, then dry and reinsert. Clean after every cycle for optimal performance.
What should I do if the dryer does not start?
Check that the door is fully closed and latched. Ensure the power cord is plugged in and the circuit breaker is on. If the display shows an error code, consult the manual. Also verify that the water tank is not full and the lint filter is clean.
How to drain the water tank on the ADC70W?
Pull out the water tank from the bottom right corner of the dryer (behind the flap). Open the cap and pour the water into a sink. Replace the tank and push it back in until it clicks. Empty after each use if not connected to a drain hose.
What is the maximum load capacity for the Altus ADC70W?
The maximum drying capacity is 7 kg. Overloading can cause poor drying results and increased wear. For best performance, load loosely and sort fabrics by type.
Can I use fabric softener sheets in this dryer?
Yes, you can use fabric softener sheets. However, avoid overuse as they can leave residue on the lint filter. Follow the manufacturer's instructions on the packaging. Alternatively, use liquid fabric softener in the washing machine.
How do I reset the Altus ADC70W after an error?
Turn the program dial to the 'Off' position and unplug the dryer for 1-2 minutes. Plug back in, select a program, and start. If the error persists, refer to the trouble shooting section or contact support.
What does the 'Clean Condenser' indicator mean?
This indicator reminds you to clean the condenser unit. Open the bottom flap, remove the condenser by pulling the handles, and rinse it with a shower head. Dry thoroughly and reinstall. This is essential for energy efficiency and safety.
Is the Altus ADC70W vented or condenser?
It is a condenser dryer. It collects moisture in a water tank rather than venting hot air outside. You can also connect a drain hose for continuous draining.
How do I reverse the door on my ADC70W?
Unplug the dryer. Remove the hinge covers and screws, then lift the door off. Attach the hinge brackets to the opposite side and reinstall the door. The door is reversible; instructions are in the manual.
What is the energy consumption of the Altus ADC70W?
The annual energy consumption is approximately 560 kWh based on 160 drying cycles. The actual consumption varies by program and load. It is rated energy class C.
User questions about ADC70W ALTUS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble drier in PDF format for free! Find your manual ADC70W - ALTUS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ADC70W by ALTUS.
USER MANUAL ADC70W ALTUS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ALTUS
Model : ADC70W
Category : Tumble drier