DS-PWA64-L-WB - Alarm system Hikvision - Free user manual and instructions
Find the device manual for free DS-PWA64-L-WB Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Alarm Siren / Detector |
| Model | DS-PWA64-L-WB |
| Brand | Hikvision |
| Dimensions (H x W x D) | 120 mm x 80 mm x 30 mm |
| Weight | 200 g |
| Power Supply | DC 12V or 3.6V Lithium battery (CR123A) |
| Wireless Protocol | Hikvision proprietary 433 MHz / 868 MHz |
| Wireless Range | Up to 300 m (open space) |
| Alarm Output | Built-in siren (105 dB) |
| Tamper Protection | Wall tamper switch |
| Operating Temperature | -10 °C to 50 °C |
| IP Rating | IP30 (indoor use) |
| LED Indicator | Tri-color LED (red/green/blue) |
| Battery Life | Up to 2 years (typical usage) |
| Low Battery Detection | Yes, transmitted to control panel |
| Cleaning Instructions | Wipe with a soft dry cloth; do not use solvents |
| Maintenance | Test functionality monthly; replace battery as needed |
| Safety | Complies with EN 50131-2-4 Grade 2 |
| Spare Parts / Repairability | Battery replaceable; device not user-serviceable internally |
| Included Accessories | Mounting kit, user manual |
| Compatibility | Hikvision alarm control panels (e.g., DS-PWA32) |
| Certifications | CE, FCC, RCM |
Frequently Asked Questions - DS-PWA64-L-WB Hikvision
How do I pair the DS-PWA64-L-WB with my alarm panel?
Insert the battery, then press and hold the Learn button for 3 seconds until the LED flashes rapidly. Put your panel into pairing mode as per its manual. The siren will emit a confirmation beep when successfully paired.
What type of battery does the siren use?
It uses a 3.6V CR123A lithium battery. Do not use rechargeable batteries.
How can I test the siren?
Trigger a test alarm from your panel or press the Test button on the siren (locate the small pinhole, use a paperclip). The siren will sound for 2 seconds and the LED will flash.
What does the LED color indicate?
Red steady: alarm or fault. Green flashing: normal operation (heartbeat). Blue flashing: pairing mode. Off: no power or battery drained.
My siren is not responding. What should I check?
First, ensure the battery is fresh and correctly inserted. Check if the tamper switch is pressed (device must be mounted on the bracket). Then re‑pair with the panel. If still not working, reset by removing battery and pressing the learn button for 5 seconds.
What is the wireless range of the siren?
In open space, the range is up to 300 meters. Indoors with walls, the range may be reduced to 50‑100 meters. Keep the panel within range.
Can I mount this siren outdoors?
No, the DS-PWA64-L-WB is rated IP30 and is designed for indoor use only. Exposure to rain or humidity may damage it.
How do I replace the battery?
Remove the siren from its mounting bracket. Open the battery compartment cover (slide or unscrew). Replace the old CR123A with a new one, respecting polarity. Close the cover and remount. The tamper will auto‑recover.
What do I do if the siren triggers false alarms?
Check for tamper switch looseness (tighten mounting screws). Ensure no large metal objects near the siren causing interference. Reduce sensitivity if adjustable via panel. If issue persists, contact support.
Is this siren compatible with other Hikvision alarm panels?
It is designed to work with Hikvision DS-PWA series panels (e.g., DS-PWA32, DS-PWA64). For other series, check compatibility via the panel’s supported device list.
User questions about DS-PWA64-L-WB Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Alarm system in PDF format for free! Find your manual DS-PWA64-L-WB - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-PWA64-L-WB by Hikvision.