CNPS9500A LED - Refroidisseur matériel informatique ZALMAN - Free user manual and instructions
Find the device manual for free CNPS9500A LED ZALMAN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | CPU Cooler |
| Model | CNPS9500A LED |
| Brand | Zalman |
| Compatible Socket | Intel LGA 775, AMD AM2/AM2+/AM3 |
| Dimensions (L x W x H) | 94 x 62 x 130 mm |
| Weight | 380 g |
| Fan Size | 90 mm |
| Fan Speed | 1400 - 2600 RPM (with Fan Mate controller) |
| Airflow | 18 - 35 CFM |
| Noise Level | 18 - 30 dBA |
| Power Connector | 3-pin |
| Voltage | 12 V DC |
| Current | 0.16 A |
| Bearing Type | Rifle Bearing |
| Heat Sink Material | Pure Copper (base and fins) with Nickel Plating |
| Heat Pipes | 2 x 8 mm Copper Heat Pipes (direct contact) |
| LED Lighting | Blue LED |
| Included Accessories | Fan Mate speed controller, thermal compound, mounting kits for Intel and AMD |
| Maintenance | Clean fan and heatsink with compressed air or soft brush; avoid liquid cleaners |
| Safety | Ensure proper mounting to prevent damage to CPU and motherboard; keep fingers away from spinning fan |
| Spare Parts / Repairability | Fan can be replaced; heatsink is non-serviceable |
Frequently Asked Questions - CNPS9500A LED ZALMAN
Is the Zalman CNPS9500A LED compatible with Intel LGA 115X sockets?
No, the CNPS9500A LED is designed for older sockets such as Intel LGA 775 and AMD AM2/AM2+/AM3. It does not natively support LGA 115X without additional mounting brackets.
How do I install the CNPS9500A LED on an AMD motherboard?
Use the provided AMD mounting kit. Remove the stock retention bracket, align the cooler's base over the CPU, and secure it using the cross-shaped bracket and screws. Apply thermal paste before mounting.
Can I control the fan speed on this cooler?
Yes, it includes a Fan Mate speed controller that allows you to adjust the fan speed between 1400 and 2600 RPM, balancing performance and noise.
Does the cooler have a blue LED?
Yes, the fan has a blue LED that lights up when powered, giving a cool aesthetic.
What is the noise level of the CNPS9500A LED?
Noise ranges from 18 dBA at low speed to 30 dBA at maximum speed, making it relatively quiet.
How do I clean the CNPS9500A LED cooler?
Use compressed air to blow dust off the fins and fan. Avoid using water or liquid cleaners. For stubborn dust, use a soft brush.
What type of thermal paste should I use?
The cooler comes with Zalman's thermal compound pre-applied or in a tube. You can use any standard thermal paste; apply a pea-sized amount on the CPU.
Is the CNPS9500A LED suitable for overclocking?
It provides adequate cooling for moderate overclocking on compatible CPUs. However, for extreme overclocks, a larger cooler may be needed.
Can I replace the fan if it fails?
Yes, the fan is replaceable. Use a standard 90mm fan with a 3-pin connector. The original fan can be removed by unclipping it from the heatsink.
Does the cooler require a backplate?
No, the CNPS9500A LED uses a push-pin or screw mounting system that attaches directly to the motherboard without a separate backplate.
User questions about CNPS9500A LED ZALMAN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Refroidisseur matériel informatique in PDF format for free! Find your manual CNPS9500A LED - ZALMAN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CNPS9500A LED by ZALMAN.
USER MANUAL CNPS9500A LED ZALMAN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ZALMAN
Model : CNPS9500A LED
Category : Refroidisseur matériel informatique