IPX-2200 - Uncategorized Planet - Free user manual and instructions
Find the device manual for free IPX-2200 Planet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type de produit | Industrial Ethernet Switch |
| Dimensions | 100 x 75 x 25 mm (3.94 x 2.95 x 0.98 in) |
| Poids | 200 g (0.44 lb) |
| Alimentation | DC 12-48V via terminal block or PoE input |
| Consommation électrique | Max 6W |
| Nombre de ports | 2 x 10/100/1000Base-T PoE+ |
| Budget PoE | Up to 30W per port |
| Température de fonctionnement | -40°C à 75°C |
| Humidité de fonctionnement | 5% à 95% (sans condensation) |
| Méthode de montage | Montage sur rail DIN ou mural |
| Fonctions principales | Alimentation PoE, redondance de puissance, diagnostic de câble |
| Entretien et nettoyage | Nettoyer avec un chiffon sec et doux; ne pas utiliser de solvants |
| Sécurité | Installer dans un endroit aéré; déconnecter l'alimentation avant entretien |
| Pièces détachées et réparabilité | Aucune pièce réparable par l'utilisateur; contacter le support technique |
| Informations générales | Garantie 2 ans; conforme CE, FCC |
Frequently Asked Questions - IPX-2200 Planet
How do I power the Planet IPX-2200?
The IPX-2200 can be powered via a DC power supply (12-48V) connected to the terminal block, or via PoE input from a PoE switch. The device will automatically select the power source.
What is the maximum PoE budget per port?
Each port supports PoE+ with up to 30W output, compliant to IEEE 802.3at. The total power budget depends on the input power source.
Can the IPX-2200 be used outdoors?
The switch is rated for industrial use with an operating temperature range of -40°C to 75°C, but it must be installed in a weather-protected environment to avoid direct exposure to moisture and dust.
How do I mount the device?
The switch supports both DIN rail mounting and wall mounting. A mounting kit is included. Ensure the installation surface is stable and ventilated.
What does the diagnostic LED indicate?
The device has LEDs for power, PoE status, and link/activity. Refer to the manual for complete LED patterns. A flashing LED typically indicates activity, while steady light indicates link established.
My device is not powering on. What should I check?
First, verify the power source is active and within the specified range (12-48V DC or PoE). Check the power cable connections. If using PoE, ensure the upstream switch provides PoE. If still not powering, try a different power source.
Can I use the IPX-2200 with a non-PoE switch?
Yes, but only as a normal switch without PoE output. The PoE function requires PoE input to supply power to connected devices. Alternatively, use the DC power input.
How do I reset the switch to factory defaults?
There is no dedicated reset button. To reset, disconnect power and reconnect while holding the reset hole (if present). Otherwise, resetting may not be possible; refer to the manual.
Is the device compliant with environmental standards?
Yes, the IPX-2200 meets CE and FCC standards. It is RoHS compliant and designed for industrial environments with high reliability.
Where can I download the full user manual?
The user manual is available for free download at notice-facile.com. Search for Planet IPX-2200 and select your preferred language.
User questions about IPX-2200 Planet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual IPX-2200 - Planet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IPX-2200 by Planet.
USER MANUAL IPX-2200 Planet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Planet
Model : IPX-2200
Category : Uncategorized