ASC800BD - Tumble drier ASPES - Free user manual and instructions
Find the device manual for free ASC800BD ASPES in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tumble Dryer |
| Brand | Aspes |
| Model | ASC800BD |
| Capacity | 8 kg |
| Drying Type | Condenser (Heat Pump) |
| Energy Efficiency Class | A++ |
| Annual Energy Consumption | 235 kWh |
| Dimensions (H x W x D) | 850 x 600 x 600 mm |
| Net Weight | 45 kg |
| Power Supply | 220-240 V, 50 Hz |
| Rated Power | 1500 W |
| Drum Volume | 118 L |
| Number of Programs | 15 |
| Noise Level | 65 dB(A) |
| Delay Start | Yes (up to 24 hours) |
| Reversible Door | Yes |
| Anti-Crease Function | Yes |
| Lint Filter | Removable, washable |
| Condenser Self-Cleaning | Yes |
Frequently Asked Questions - ASC800BD ASPES
How to clean the lint filter on Aspes ASC800BD?
Open the door and pull out the lint filter located in the door opening. Remove lint by hand or with a soft brush. Rinse under running water if needed. Dry thoroughly before reinserting. Clean after every cycle.
What is the maximum load capacity of this dryer?
The Aspes ASC800BD has a maximum load capacity of 8 kg for cotton programs. For synthetics, reduce to 4 kg.
How to install the dryer?
Place the dryer on a level, stable surface. Ensure at least 10 cm clearance on all sides for ventilation. For condenser models, no external venting required. Connect to a suitable power outlet (220-240V).
How to reset the dryer after an error?
Turn off the dryer and unplug it for 1-2 minutes. Plug back in and restart. If error persists, refer to the user manual for specific error codes or contact service.
Can I pause the drying cycle and add clothes?
Yes, press the Start/Pause button to pause. Wait for drum to stop, then open the door. Add clothes, close door, and press Start to resume.
What are the energy efficiency specifications?
The dryer is rated A++ energy class, with an annual energy consumption of approximately 235 kWh based on 160 cycles.
How to use the delay start function?
Select your drying program, then press the Delay Start button repeatedly to set desired delay (up to 24 hours). Press Start; the dryer will begin at the set time.
Why does the dryer stop before finishing?
Possible causes: overloaded drum, lint filter clogged, water tank full (for condenser models), or overheating. Check these and restart. If problem persists, consult manual.
How to clean the condenser?
The ASC800BD has a self-cleaning condenser. However, periodically check for lint buildup at the bottom front. Access by opening the lower flap and pulling out the condenser unit. Rinse with water and dry before reinserting.
What spare parts are available for this model?
Common spare parts include lint filters, door seals, belts, heating elements, and control boards. Use original Aspes parts for safety and performance. Check your user manual for part numbers.
User questions about ASC800BD ASPES
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble drier in PDF format for free! Find your manual ASC800BD - ASPES and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ASC800BD by ASPES.
USER MANUAL ASC800BD ASPES
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ASPES
Model : ASC800BD
Category : Tumble drier