EKI-1224-CE - Server Advantech - Free user manual and instructions
Find the device manual for free EKI-1224-CE Advantech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Serial Device Server |
| Brand | Advantech |
| Model | EKI-1224-CE |
| Number of Serial Ports | 4 |
| Serial Interface | RS-232/422/485 |
| Ethernet Interface | 10/100 Mbps |
| Dimensions (W x D x H) | 70 mm x 111 mm x 25 mm |
| Weight | 150 g |
| Power Supply Input | 12 to 48 VDC |
| Power Consumption | 3.5 W (typical) |
| Operating Temperature | -10 to 60 °C |
| Protection Rating | IP30 |
| Mounting | DIN Rail |
| Protocols Supported | TCP/IP, UDP, Modbus TCP, ARP, ICMP |
| Configuration | Web interface, Utility |
| Warranty | 2 years |
| Cleaning Instructions | Use dry cloth; avoid solvents |
| Safety Certifications | CE, FCC |
| Spare Parts Availability | Power adapter, mounting brackets |
| Repairability | Replaceable power supply module |
Frequently Asked Questions - EKI-1224-CE Advantech
How do I assign an IP address to the EKI-1224-CE?
Use the Advantech Serial Device Server Utility or the web interface. By default, the device obtains an IP via DHCP. You can also set a static IP using the utility.
Can the EKI-1224-CE work as a Modbus gateway?
Yes, it supports Modbus TCP to Modbus RTU/ASCII conversion, acting as a gateway between Ethernet and serial Modbus devices.
What is the maximum baud rate supported?
The serial ports support baud rates up to 921600 bps.
How many virtual COM ports can be created?
Up to 4 virtual COM ports can be created on the host PC using the provided driver, mapping each to a physical serial port of the device.
Is the EKI-1224-CE compatible with Windows 10?
Yes, drivers are available for Windows 10/8/7 and also for Linux.
What is the power supply requirement?
It requires a 12 to 48 VDC power supply with at least 3.5W. A terminal block connector is provided.
Can I mount the device on a DIN rail?
Yes, it comes with a DIN rail mounting kit for easy installation in industrial cabinets.
How do I reset the device to factory defaults?
Press and hold the reset button (recessed) for at least 5 seconds, then release. The device will reboot with default settings.
What is the operating temperature range?
It can operate in temperatures from -10 to 60 °C, suitable for industrial environments.
Does the device support RS-485 termination?
Yes, built-in 120 ohm termination resistors can be enabled via DIP switches for each serial port.
User questions about EKI-1224-CE Advantech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual EKI-1224-CE - Advantech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EKI-1224-CE by Advantech.
USER MANUAL EKI-1224-CE Advantech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Advantech
Model : EKI-1224-CE
Category : Server