DS-PDD12P-EG2-WE - Alarm system Hikvision - Free user manual and instructions
Find the device manual for free DS-PDD12P-EG2-WE Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Passive Infrared (PIR) Motion Detector |
| Brand | Hikvision |
| Model | DS-PDD12P-EG2-WE |
| Detection Technology | Passive Infrared (Dual Element) |
| Detection Range | 12 meters (39 feet) at 90° |
| Pet Immunity | Up to 25 kg (55 lbs) |
| Alarm Output | Wireless (433 MHz or 868 MHz depending on region) |
| Power Supply | 3× AA batteries (1.5 V) or 9 V alkaline battery |
| Battery Life | Up to 3 years (typical usage) |
| Dimensions (W × H × D) | 110 mm × 60 mm × 45 mm |
| Weight | Approximately 150 g (without batteries) |
| Operating Temperature | -10°C to +55°C (14°F to 131°F) |
| Humidity | 0% – 95% (non-condensing) |
| Tamper Protection | Yes, tamper switch against cover removal |
| LED Indicator | Red LED for alarm, green for low battery |
| Installation Type | Wall or corner mount, included bracket |
| Frequency Bands | 868 MHz (EU) / 433 MHz (other regions) |
| Compatibility | Hikvision alarm control panels (wireless series) |
| Certifications | CE, FCC, RoHS |
Frequently Asked Questions - DS-PDD12P-EG2-WE Hikvision
How do I pair the DS-PDD12P-EG2-WE with my Hikvision alarm panel?
Refer to the panel's user manual. Typically, put the panel in learning mode, then press and hold the tamper button on the detector for 3 seconds. The LED will flash to confirm pairing.
What kind of batteries does the detector use and how long do they last?
It uses three AA 1.5V alkaline batteries (or one 9V alkaline). Battery life is up to 3 years under normal use, depending on environment and frequency of alarms.
How do I change the batteries?
Remove the cover by pressing the tamper latch. Replace all batteries with new ones, ensuring correct polarity. Reattach the cover securely to avoid false tamper alarms.
What is the detection range of the motion detector?
The detector has a 12 meter (39 feet) range with a detection angle of 90°. It covers a wide area in front of the sensor.
Is the detector pet immune?
Yes, it is designed to ignore pets up to 25 kg (55 lbs) by focusing on human-sized heat patterns. However, ensure proper mounting height to reduce false triggers.
How do I mount the detector?
Use the supplied bracket to mount on a wall or corner. Recommended height is 2.0–2.2 m (6.5–7 ft) for optimal coverage. Avoid pointing at heat sources or windows.
What does the LED indicator mean?
Red flash: alarm detected (or test mode). Green flash: low battery. No light: normal operation or LED disabled in settings.
How do I perform a walk test?
Put the system in test mode (via the panel). Walk across the detection zone. Each time you trigger the detector, the red LED will flash, confirming detection.
What should I do if the detector triggers false alarms frequently?
Check for nearby heat sources (e.g., radiators, sunlight), pets, or moving objects. Adjust the mounting position or reduce sensitivity (if adjustable). Also ensure the tamper switch is securely closed.
Is the detector weatherproof for outdoor use?
No, the DS-PDD12P-EG2-WE is designed for indoor use only. It is not weatherproof. Use in dry environments protected from rain and direct sunlight.
User questions about DS-PDD12P-EG2-WE Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Alarm system in PDF format for free! Find your manual DS-PDD12P-EG2-WE - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-PDD12P-EG2-WE by Hikvision.
USER MANUAL DS-PDD12P-EG2-WE Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-PDD12P-EG2-WE
Category : Alarm system