DS-PDCM15PF-IR - Alarm system Hikvision - Free user manual and instructions
Find the device manual for free DS-PDCM15PF-IR Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless PIR Motion Detector |
| Brand | Hikvision |
| Model | DS-PDCM15PF-IR |
| Detection Method | Passive Infrared (PIR) |
| Detection Range | Up to 12 meters (110° wide) |
| Pet Immunity | Up to 25 kg (55 lbs) |
| Power Supply | 3V CR123A lithium battery (included) |
| Battery Life | Up to 3 years (typical use) |
| Wireless Protocol | Hikvision proprietary wireless (868 MHz) |
| Operating Temperature | -10°C to +55°C (14°F to 131°F) |
| Dimensions (Ø x H) | 115 mm x 55 mm (4.5 x 2.2 in) |
| Weight | 120 g (4.2 oz) without battery |
| Mounting | Ceiling or wall mount (bracket included) |
| Tamper Protection | Tamper switch against cover removal |
| LED Indicator | Red/blue for alarm and status |
| Certification | CE, FCC, RoHS |
| Compatibility | Hikvision alarm systems (e.g., DS-PS1, DS-PS2) |
| Cleaning | Wipe with dry cloth; avoid liquids |
| Repair/Spare Parts | Contact Hikvision support; battery replaceable |
Frequently Asked Questions - DS-PDCM15PF-IR Hikvision
How do I install the DS-PDCM15PF-IR detector?
Mount the detector on a ceiling or wall at 2-2.5m height using the included bracket. Insert the CR123A battery, then pair it with your alarm panel by following the panel's enrollment procedure. Ensure the detection area is free of obstructions.
What is the detection range and angle?
The detector has a maximum range of 12 meters (40 ft) and a wide detection angle of 110 degrees. It is pet immune up to 25 kg (55 lbs) to reduce false alarms.
How long does the battery last?
Under normal use, the CR123A battery lasts up to 3 years. When the battery is low, the detector will send a low battery signal to the alarm panel.
Can I use this detector outdoors?
The DS-PDCM15PF-IR is designed for indoor use only. It operates between -10°C and +55°C, but exposure to rain or direct sunlight may damage it.
How do I clean the detector?
Use a soft, dry cloth to gently wipe the housing. Do not use water, solvents, or cleaning agents, as they may damage the sensor.
What should I do if the detector triggers false alarms?
Check for pets or objects moving within range, ensure the detector is not facing a heat source like a heater or direct sunlight, and verify it is mounted at the correct height. If issues persist, reset the detector by removing and reinserting the battery.
Is the detector compatible with third-party alarm systems?
The detector uses Hikvision's proprietary wireless protocol and is designed to work with Hikvision alarm panels (e.g., DS-PS1, DS-PS2). It may not be compatible with other brands.
How do I replace the battery?
Remove the detector from its mount, slide off the cover, and replace the CR123A battery with a new one. Observe polarity (+/-). Reattach the cover and remount.
What does the LED indicator mean?
A red flash indicates detection/alarm, blue flash indicates normal operation or pairing mode. Refer to the manual for specific blink patterns.
Can I adjust the detection sensitivity?
The DS-PDCM15PF-IR does not have user-adjustable sensitivity. It is pre-calibrated for optimal performance. For special needs, consult Hikvision technical support.
User questions about DS-PDCM15PF-IR Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Alarm system in PDF format for free! Find your manual DS-PDCM15PF-IR - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-PDCM15PF-IR by Hikvision.
USER MANUAL DS-PDCM15PF-IR Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-PDCM15PF-IR
Category : Alarm system