MIRAGE Q6 PAK - Lighting American DJ - Free user manual and instructions
Find the device manual for free MIRAGE Q6 PAK American DJ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Par Can |
| Brand | American DJ |
| Model | MIRAGE Q6 PAK |
| LED Quantity | 6 |
| Dimensions (L x W x H) | 15 x 10 x 5 inches (approx.) |
| Weight | 5 lbs (approx.) |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 60W (max) |
| Light Source | 6 x 10W RGBW LEDs |
| Beam Angle | 25° |
| Control Protocol | DMX512 |
| DMX Channels | 6 or 10 selectable |
| Operating Modes | DMX, Master/Slave, Sound Active, Auto |
| Housing Material | Aluminum alloy |
| Cooling | Convection |
| IP Rating | IP20 (indoor use only) |
| Mounting | Floor stand or truss via included bracket |
| Safety Features | Fuse protection, overheat shutdown |
| Maintenance | Clean lens with damp cloth; check cables regularly |
| Repairability | Replaceable LEDs and fuse; contact service center for other parts |
Frequently Asked Questions - MIRAGE Q6 PAK American DJ
How do I set up the MIRAGE Q6 PAK for the first time?
Unpack the fixture, mount it on a stable surface or truss, connect power (100-240V AC), and turn on using the power switch. The unit will start in auto mode. Refer to the manual for DMX addressing.
What DMX channels does the MIRAGE Q6 PAK use?
The fixture can operate in 6-channel or 10-channel mode. In 6-channel, control is: 1-red, 2-green, 3-blue, 4-white, 5-master dimmer, 6-strobe. In 10-channel, additional channels allow independent colors, dimmer, and strobe per LED. Set via dip switches or menu.
Can I control the light with sound?
Yes, select Sound Active mode via the control panel or DMX. The internal microphone triggers light changes. Adjust sensitivity if needed.
How do I daisy chain multiple MIRAGE Q6 PAK units?
Use DMX cables to connect the DMX Out of the first unit to the DMX In of the next. Set the first as Master, others as Slave (via menu). The master will control the slaves in sync.
What should I do if the light doesn't turn on?
Check power connection, ensure the power switch is on, and inspect the fuse (located near the power inlet). Replace with same rating (usually T1A/250V). If still off, contact support.
How often should I clean the fixture?
Clean the lens and housing every few months or when necessary. Use a soft, dry cloth. Avoid solvents. Ensure power is off before cleaning.
Can I replace the LEDs myself?
Yes, each LED module is replaceable. Disconnect power, open the rear panel, unplug the faulty LED, and install a new one. Ensure correct polarity. Contact American DJ for replacement parts.
What does the strobe function do?
In 6-channel mode, channel 6 controls strobe rate (0-255). In 10-channel mode, each color has its own strobe. Strobe pulses the LEDs at adjustable speed.
Is the MIRAGE Q6 PAK suitable for outdoor use?
No, it has an IP20 rating, meaning it is only for indoor use. Avoid moisture, rain, and extreme temperatures.
How do I reset the fixture to factory settings?
Press and hold the Menu button for 3 seconds, navigate to 'Factory Reset' using the up/down buttons, press Enter, and confirm. All settings will reset.
User questions about MIRAGE Q6 PAK American DJ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual MIRAGE Q6 PAK - American DJ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MIRAGE Q6 PAK by American DJ.
USER MANUAL MIRAGE Q6 PAK American DJ
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : American DJ
Model : MIRAGE Q6 PAK
Category : Lighting