VAX

Floormate VX34SK - Vacuum Cleaner VAX - Free user manual and instructions

Find the device manual for free Floormate VX34SK VAX in PDF.

📄 16 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice VAX Floormate VX34SK - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Hard Floor Cleaner / Vacuum
Brand Vax
Model Floormate VX34SK
Dimensions (approx) 30 cm x 25 cm x 110 cm
Weight 5 kg
Power Rating 1000 W
Power Cord Length 6 m
Dust Capacity 1.5 L
Water Tank Capacity 0.5 L (dirty), 0.5 L (clean)
Cleaning Modes Dry vacuum, wet wash, dry mode
Filtration System Washable foam filter
Brush Bar Soft brush roll for hard floors
Nozzle Type Integrated floor head with squeegee
Noise Level 78 dB
Power Source Corded electric
Maintenance Clean tank and filter after each use
Safety Features Automatic shut-off when water tank full
Spare Parts Available Filters, brush rolls, tanks
Repairability Modular design, user-replaceable parts
Warranty 2 years

Frequently Asked Questions - Floormate VX34SK VAX

How do I switch between wet and dry mode?
To switch modes, press the mode button on the handle. Choose Dry Vacuum for dust and debris, Wet Wash for mopping, and Dry Mode to dry floors after washing.
What should I do if the suction power decreases?
Check the dirty water tank; if full, empty it. Also inspect the filter for blockages and clean it under running water if needed. Ensure the brush roll is free of hair and debris.
How do I clean the filter?
Turn off and unplug the machine. Remove the foam filter from the tank. Rinse it with warm water, squeeze out excess, and let it air dry completely before reinstalling.
Can I use this cleaner on carpets?
The Floormate VX34SK is designed for hard floors only. Using it on carpets may damage the brush roll and reduce performance.
The machine is leaving streaks on the floor. What's wrong?
Ensure you are using the correct cleaning solution (Vax recommended). Also check that the squeegee is clean and free from debris. Over-wetting can also cause streaks.
How do I replace the brush roll?
Unplug the machine. Turn it over and locate the brush roll cover. Release the clips, remove the old brush roll, and snap in the new one. Replace the cover securely.
The device stopped suddenly while cleaning. What happened?
This may be due to a full dirty water tank or an overheat protection feature. Empty the tank and allow the machine to cool for 30 minutes before restarting.
What cleaning solutions are safe to use?
Only use Vax formulated cleaning solutions specifically for hard floor cleaners. Using other chemicals may damage the machine or leave residues.
How often should I replace the filter?
The foam filter should be replaced every 6-12 months depending on usage. If it becomes damaged or loses shape, replace it sooner.
Where can I find spare parts?
Spare parts such as filters, brush rolls, and tanks are available on the Vax official website or from authorized dealers. Use the model number VX34SK for compatibility.

User questions about Floormate VX34SK VAX

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual Floormate VX34SK - VAX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Floormate VX34SK by VAX.

USER MANUAL Floormate VX34SK VAX

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : VAX

Model : Floormate VX34SK

Category : Vacuum Cleaner