XPA1000 - Receiver OSD Audio - Free user manual and instructions
Find the device manual for free XPA1000 OSD Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Receiver |
| Channels | 2 |
| Power Output per Channel | 100W RMS (8 ohms, 20Hz-20kHz, 0.05% THD) |
| Frequency Response | 20Hz - 20kHz (±0.5dB) |
| Total Harmonic Distortion | <0.05% |
| Signal-to-Noise Ratio | >90dB |
| Input Sensitivity | 200mV (RCA) |
| Input Impedance | 47k ohms |
| Audio Inputs | 4 RCA, 1 Optical, 1 Coaxial |
| Audio Outputs | Speaker Terminals, Subwoofer Pre-out, Headphone Jack |
| Remote Control | Included (IR) |
| Power Supply | 120V AC, 60Hz |
| Power Consumption | 300W (max) |
| Dimensions (W x H x D) | 17.0 x 5.0 x 12.0 inches |
| Weight | 15.0 lbs |
| Material | Aluminum faceplate, steel chassis |
| Cleaning Instructions | Wipe with a soft, dry cloth. Avoid solvents. |
| Safety Precautions | Do not expose to moisture or heat. Ensure proper ventilation. |
| Spare Parts & Repairability | Contact OSD Audio support for authorized service. |
| Warranty | 2 years limited |
Frequently Asked Questions - XPA1000 OSD Audio
How many channels does the OSD Audio XPA1000 have?
The OSD Audio XPA1000 is a 2-channel stereo receiver designed for high-fidelity audio.
What is the power output per channel?
It delivers 100W RMS per channel into 8 ohms, from 20Hz to 20kHz with less than 0.05% THD.
Does the XPA1000 have a built-in phono preamp?
No, the XPA1000 does not include a phono preamp. You will need an external phono stage for a turntable.
What audio inputs are available?
It features 4 RCA analog inputs, plus optical and coaxial digital inputs for connecting various sources.
Can I connect a subwoofer?
Yes, the receiver includes a subwoofer pre-out for connecting a powered subwoofer.
Does it support Bluetooth or wireless streaming?
No, the XPA1000 is a traditional analog receiver without built-in Bluetooth or Wi-Fi. Use an external adapter if needed.
How do I reset the receiver to factory defaults?
Turn off the unit, then press and hold the Power button for 5 seconds. The display will flash and reset.
What type of speaker wire should I use?
Use 16-14 AWG speaker wire with banana plugs or bare wire. Ensure proper polarity (+/-).
The receiver has no sound. What should I check?
First, verify the input source is selected correctly and volume is turned up. Check speaker connections and ensure the speakers are not blown. Also check if the mute function is active.
Where can I find the user manual?
Download the PDF manual from notice-facile.com or the OSD Audio website for detailed instructions.
User questions about XPA1000 OSD Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual XPA1000 - OSD Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XPA1000 by OSD Audio.
USER MANUAL XPA1000 OSD Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : OSD Audio
Model : XPA1000
Category : Receiver