Axcor Profile 600 - Effect machine Claypaky - Free user manual and instructions
Find the device manual for free Axcor Profile 600 Claypaky in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Moving Head Profile Fixture |
| Light Source | 600W LED Engine |
| Color Temperature | 6500K (adjustable) |
| Zoom Range | 5° to 45° |
| Pan Range | 540° |
| Tilt Range | 270° |
| Dimming | 0-100% linear |
| Strobe | 0-30 Hz |
| Control Protocols | DMX512, RDM |
| DMX Channels | 24 / 32 modes |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 700W max |
| Dimensions (L x W x H) | 450 x 350 x 280 mm |
| Weight | 19.5 kg |
| Certifications | CE, ETL, RoHS |
| IP Rating | IP20 |
| Maintenance | Clean optics with dry cloth; check ventilation monthly |
| Safety Features | Automatic temperature protection, safety cable attachment |
| Spare Parts | LED module, power supply, fans, gobo wheel motor |
| Repairability | Modular design, easy access to components |
| Included Accessories | Power cord, XLR cables, mounting yoke |
Frequently Asked Questions - Axcor Profile 600 Claypaky
How to reset the lamp hours on Axcor Profile 600?
Go to the menu, select 'Advanced' > 'Lamp Hours' > 'Reset'. Confirm with 'Enter'.
What DMX protocols are supported?
The fixture supports DMX512 and RDM for remote device management.
How often should I clean the optics?
Clean the front lens and reflectors weekly with a soft, dry cloth to maintain light output.
Can I use the fixture in outdoor settings?
No, the Axcor Profile 600 is rated IP20 and should only be used indoors or in dry, covered locations.
What is the maximum ambient temperature for operation?
The maximum ambient temperature is 40°C (104°F). Ensure adequate ventilation.
How do I replace the gobo?
Turn off the fixture, open the gobo slot cover, insert the new gobo with the printed side facing the lens, and close the cover.
What does the 'Auto' mode do?
In Auto mode, the fixture runs pre-programmed sequences for standalone use without a controller.
Why is the fan noisy?
Fan speed increases automatically with internal temperature. Ensure the vents are not blocked. If noise persists, check for dirty filters.
How to update firmware?
Use a USB drive with the latest firmware file. Insert into the USB port, go to 'Advanced' > 'Firmware Update' and follow on-screen instructions.
What safety measures should I take?
Always use a safety cable and secure the fixture to a truss or stand. Disconnect power before servicing. Do not look directly into the light beam.
User questions about Axcor Profile 600 Claypaky
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Effect machine in PDF format for free! Find your manual Axcor Profile 600 - Claypaky and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Axcor Profile 600 by Claypaky.
USER MANUAL Axcor Profile 600 Claypaky
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Claypaky
Model : Axcor Profile 600
Category : Effect machine