Subsequent 25 - Keyboard Moog - Free user manual and instructions
Find the device manual for free Subsequent 25 Moog in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Analog Synthesizer Keyboard |
| Brand | Moog |
| Model | Subsequent 25 |
| Keyboard | 25 slim keys (velocity sensitive) |
| Sound Engine | 2 analog oscillators, 1 sub-oscillator, 4-pole ladder filter |
| Polyphony | Monophonic with paraphonic mode |
| Sequencer | Built-in step sequencer (up to 256 steps) |
| Arpeggiator | Built-in arpeggiator with multiple modes |
| Effects | Drive circuit, analog delay, lush chorus |
| Connections | 1/4" audio out, headphone out, MIDI In/Out/Thru, CV/Gate |
| Power Supply | 12V DC, center-positive (adapter included) |
| Dimensions (W x D x H) | 21.1 x 12.4 x 3.9 inches (536 x 315 x 99 mm) |
| Weight | 8.8 lbs (4.0 kg) |
| Construction | Metal chassis with wooden side panels |
| Included Accessories | AC adapter, user manual |
| Reparability | Service available via authorized Moog centers; schematics available for advanced users |
| Maintenance | Wipe with dry soft cloth; avoid liquids; no internal cleaning needed |
| Safety | Use only supplied power adapter; keep away from moisture |
Frequently Asked Questions - Subsequent 25 Moog
How do I reset the Subsequent 25 to factory settings?
To perform a factory reset, hold down the SHIFT button while powering on the unit. The display will show 'FACTORY' and all user data will be erased. Confirm by pressing ENTER.
Can I use the Subsequent 25 with external effects pedals?
Yes, use the 1/4" audio out to send the signal to effects pedals. You can also use the send/return loop if equipped. The unit operates at line level.
How do I update the firmware?
Visit the Moog Music website to download the latest firmware. Connect the Subsequent 25 via MIDI and use a compatible sysex utility to upload the update. Follow the instructions carefully.
What are the power requirements?
The Subsequent 25 requires a 12V DC, center-positive power supply with a minimum current of 1.5A. Use only the included adapter or a Moog-approved replacement.
How do I clean the keyboard?
Turn off the unit. Use a soft, dry cloth to wipe the keys and surface. For stubborn dirt, slightly dampen the cloth with water. Avoid any solvents or abrasive cleaners.
Is the Subsequent 25 compatible with Eurorack?
Yes, the Subsequent 25 has CV and Gate outputs that can control Eurorack modules. Use 1/8" to 1/8" cables to connect to your modular system. Note that CV output is roughly 1V/octave.
What should I do if a key is stuck?
Gently remove any debris beneath the key. If the key is physically stuck, you may need to open the unit to adjust the key mechanism. This is best done by a qualified technician.
How can I use the arpeggiator?
Press the ARP button to activate. Use the RATE knob to set speed, PATTERN to select pattern type (up, down, up/down, random, etc.), and hold ARP while turning PATTERN for range options.
What is the warranty period?
Moog offers a limited 2-year warranty from date of purchase for defects in materials and workmanship. Register your product online to activate. Contact Moog support for assistance.
Can I use a sustain pedal?
The Subsequent 25 does not have a dedicated sustain pedal input because it is monophonic. However, the Gate input can be used with a momentary footswitch to sustain notes when connected via a CV/Gate interface.
User questions about Subsequent 25 Moog
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Keyboard in PDF format for free! Find your manual Subsequent 25 - Moog and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Subsequent 25 by Moog.
USER MANUAL Subsequent 25 Moog
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Moog
Model : Subsequent 25
Category : Keyboard