AW-GEV-288A-370 - Switch Vivotek - Free user manual and instructions
Find the device manual for free AW-GEV-288A-370 Vivotek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Gigabit Ethernet Switch |
| Model | AW-GEV-288A-370 |
| Number of Ports | 28 (24 Gigabit Ethernet + 4 SFP) |
| PoE Support | Yes, PoE+ (802.3at) on all 24 copper ports |
| PoE Power Budget | 370 W |
| Switching Capacity | 56 Gbps |
| Dimensions (W x D x H) | 440 x 250 x 44 mm (19-inch rackmount) |
| Weight | 4.2 kg (9.26 lbs) |
| Power Supply | Internal AC 100-240V, 50-60Hz |
| Power Consumption | Max 400 W (including PoE) |
| Management | Web-based, SNMP, CLI, Telnet, SSH |
| VLAN Support | 802.1Q VLAN, port-based VLAN |
| Security Features | 802.1X, ACL, port security, DHCP snooping |
| Fan Type | Smart fan with speed control |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Humidity | 10% to 90% non-condensing |
| MTBF | 250,000 hours |
| Warranty | 5 years limited |
| Included Accessories | Power cord, rackmount kit, console cable, CD with manual |
Frequently Asked Questions - AW-GEV-288A-370 Vivotek
How do I reset the Vivotek AW-GEV-288A-370 switch to factory defaults?
To reset the switch to factory defaults, locate the reset button on the front panel. Use a paperclip or similar tool to press and hold the button for about 10 seconds until the system LED flashes. Release the button; the switch will reboot with default settings.
What is the default IP address for accessing the web interface?
The default IP address is 192.168.1.1. Ensure your PC is in the same subnet (e.g., 192.168.1.x) and connect to the switch via an Ethernet cable. Use a web browser to access the IP.
How many PoE ports does this switch have and what is the total power budget?
The Vivotek AW-GEV-288A-370 has 24 PoE+ ports (802.3at) with a total power budget of 370 watts. Each port can deliver up to 30W.
Can this switch be mounted in a standard 19-inch rack?
Yes, the switch is designed for rackmount installation. It comes with a rackmount kit including brackets and screws. The dimensions are 440x250x44 mm, fitting a 1U space.
How do I update the firmware on this switch?
Download the latest firmware from the Vivotek support website. Log in to the web interface, go to System > Firmware Upgrade, browse for the firmware file, and click Upgrade. Do not power off during the process.
What VLAN features are supported?
The switch supports 802.1Q tag-based VLANs and port-based VLANs. You can create up to 256 VLAN groups and assign ports accordingly via the web interface or CLI.
What are the LED indicators on the front panel?
There are LEDs for Power, System, and per-port status (Link/Act and PoE). Each port has a dual-color LED: green for link/activity, amber for PoE status.
How do I configure port security?
Navigate to Security > Port Security in the web interface. You can enable MAC address learning limits, set static MAC addresses, and define action when limit is exceeded (shutdown or drop).
What is the recommended procedure for cleaning the switch?
Power off the switch and disconnect all cables. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners. For vents, use compressed air gently to remove dust. Avoid introducing moisture.
Does the switch support SNMP for network monitoring?
Yes, it supports SNMP v1/v2c/v3. You can enable SNMP in the web interface under System > SNMP and configure community strings, trap destinations, and read/write access.
User questions about AW-GEV-288A-370 Vivotek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual AW-GEV-288A-370 - Vivotek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AW-GEV-288A-370 by Vivotek.