PureSpa SSP-20-1 - Above ground pool INTEX - Free user manual and instructions
Find the device manual for free PureSpa SSP-20-1 INTEX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Above Ground Spa / Hot Tub |
| Brand | Intex |
| Model | PureSpa SSP-20-1 |
| Dimensions (L x W x H) | 77 x 77 x 28 inches |
| Water Capacity | 290 gallons (1098 liters) |
| Dry Weight | 132 lbs (60 kg) |
| Power Supply | 120 V ~ 60 Hz, 13 A |
| Heater Power | 1,000 W |
| Pump Flow Rate | 530 gal/h (2006 L/h) |
| Filtration | Type A filter cartridge (2 pieces) |
| Number of Jets | 140 bubble jets |
| Material | Puncture-resistant PVC and polyester mesh |
| Color | Gray/Black |
| Cover Included | Yes, with safety lock |
| LED Light | No |
| Safety Features | GFCI plug, auto shut-off, timer |
| Temperature Range | 68°F to 104°F (20°C to 40°C) |
| Maintenance | Clean filter every 2-3 days; replace every 2 weeks |
| Repair Parts | Seal repair kit available, pump replacements |
| Warranty | 1-year limited warranty |
Frequently Asked Questions - PureSpa SSP-20-1 INTEX
How long does it take to heat up the Intex PureSpa SSP-20-1?
Heating time depends on starting water temperature and ambient conditions. Typically, it takes 10-15 hours to reach 104°F from a cold start with the 1,000 W heater.
What is the water capacity of the PureSpa SSP-20-1?
The spa holds approximately 290 gallons (1098 liters) of water when filled to the recommended level.
How often should I replace the filter cartridge?
Filter cartridges should be replaced every 2 weeks under normal use. Clean them every 2-3 days by rinsing with water.
Can I use the PureSpa SSP-20-1 indoors?
It is designed for outdoor use. If used indoors, ensure proper ventilation and a floor that can support the weight (approx. 2,400 lbs when full).
How do I repair a puncture in the spa?
Use the included repair patch. Clean and dry the area, apply adhesive from the repair kit, press the patch firmly, and let it cure for 12 hours before refilling.
Does the spa come with a cover?
Yes, a floating cover with a safety lock is included to retain heat and keep debris out.
What is the electrical requirement for the PureSpa SSP-20-1?
It requires a grounded 120 V, 60 Hz outlet with a 13-amp circuit. The GFCI plug must be used for safety.
How many jets does the spa have?
There are 140 bubble jets that provide a relaxing massage experience.
How do I drain the water from the spa?
Use the drain valve located at the bottom of the spa. Attach a garden hose, open the valve, and let gravity drain the water.
Is the Intex PureSpa SSP-20-1 easy to set up?
Yes, it inflates in minutes using the included pump. No tools are needed for assembly. Fill with water and plug in to begin heating.
User questions about PureSpa SSP-20-1 INTEX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Above ground pool in PDF format for free! Find your manual PureSpa SSP-20-1 - INTEX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PureSpa SSP-20-1 by INTEX.
USER MANUAL PureSpa SSP-20-1 INTEX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : INTEX
Model : PureSpa SSP-20-1
Category : Above ground pool