EventLITE 4/8 Mini Q4 - Lighting Showtec - Free user manual and instructions
Find the device manual for free EventLITE 4/8 Mini Q4 Showtec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Compact LED Wash Light |
| Model | EventLITE 4/8 Mini Q4 |
| Brand | Showtec |
| Dimensions (L x W x H) | Approx. 200 x 180 x 150 mm |
| Weight | Approx. 1.2 kg |
| Power Consumption | Max 40W |
| Power Supply | 100-240V AC, 50/60Hz |
| Light Source | 4 x 8W RGBW LEDs |
| DMX Channels | 4 or 8 channels (selectable) |
| Control Modes | DMX, Master/Slave, Standalone with built-in programs |
| Beam Angle | Approx. 25° |
| Housing Material | Metal and plastic |
| Cooling | Passive convection |
| IP Rating | IP20 (indoor use only) |
| Mounting Options | Floor standing or bracket mount |
| Accessories Included | Power cord, user manual |
| Maintenance | Clean optics with a soft dry cloth; avoid solvents |
| Safety | Do not stare into light; ensure adequate ventilation; disconnect power before servicing |
| Repairability | LEDs not user-replaceable; contact qualified service |
| Certifications | CE, RoHS |
Frequently Asked Questions - EventLITE 4/8 Mini Q4 Showtec
How do I connect the EventLITE 4/8 Mini Q4 to a DMX controller?
Use a standard 3-pin XLR cable to connect the DMX input of the fixture to the DMX output of your controller. Set the DMX address using the DIP switches or menu on the fixture. Ensure the terminator is used on the last fixture.
What is the difference between 4-channel and 8-channel modes?
In 4-channel mode, you control RGBW (or single color) with basic dimming. In 8-channel mode, additional channels allow for strobe, color macros, and master dimmer. The mode is selected via the menu or DIP switches.
Can I use this fixture without a DMX controller?
Yes, the fixture has built-in standalone programs and a master/slave mode. You can set it to auto-run or sound-active mode via the menu.
What power cable does the EventLITE 4/8 Mini Q4 use?
It uses a standard IEC power cable (C13/C14). The input voltage is 100-240V AC, so it works worldwide with the appropriate plug.
How do I clean the lens and housing?
Disconnect power and allow the fixture to cool. Wipe the lens and housing with a soft, lint-free cloth. For stubborn dirt, use a mild glass cleaner. Do not use abrasive cleaners or solvents.
What is the maximum number of fixtures I can daisy-chain?
For DMX daisy chain, you can connect up to 32 fixtures on a single DMX line. For power daisy chain, check the manual for the maximum current draw; typically 8-10 fixtures can be chained.
How do I reset the fixture to factory settings?
Press and hold the 'Menu' and 'Enter' buttons simultaneously for 3 seconds, or navigate to the 'Factory Reset' option in the menu and confirm.
Is the EventLITE 4/8 Mini Q4 suitable for outdoor use?
No, the fixture has an IP20 rating, meaning it is only suitable for indoor, dry locations. Do not expose to rain or moisture.
Can I replace the LEDs if they fail?
The LEDs are not user-serviceable. If an LED fails, contact Showtec or a qualified technician for repair. Attempting to replace LEDs yourself may void the warranty.
Why is my fixture not responding to DMX?
Check that the DMX cable is properly connected and not faulty. Verify the DMX address matches the controller. Ensure the controller is sending data. Try a different DMX cable or reset the fixture.
User questions about EventLITE 4/8 Mini Q4 Showtec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual EventLITE 4/8 Mini Q4 - Showtec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EventLITE 4/8 Mini Q4 by Showtec.