GSP-9300 - Measuring equipment GW Instek - Free user manual and instructions
Find the device manual for free GSP-9300 GW Instek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Spectrum Analyzer |
| Brand | GW Instek |
| Model | GSP-9300 |
| Frequency Range | 9 kHz to 3.0 GHz |
| Resolution Bandwidth (RBW) | 10 Hz to 1 MHz in 1-3 steps |
| Amplitude Range | -100 dBm to +30 dBm |
| Input Impedance | 50 Ω |
| Display | 8.4-inch color TFT LCD (800x600) |
| Dimensions (W x H x D) | 330 x 170 x 380 mm |
| Weight | Approx. 5.5 kg |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Power Consumption | < 60 VA |
| Functions | Spectrum analysis, AM/FM demodulation, limit lines, marker measurements |
| Interface | USB, LAN, GPIB (optional), VGA output |
| Cleaning | Wipe with a soft, dry cloth |
| Safety Certifications | CE, UL, CSA |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -10°C to 60°C |
| Spare Parts / Repairability | Contact authorized service center |
| Manual Language | English (342 pages available) |
Frequently Asked Questions - GSP-9300 GW Instek
What is the frequency range of the GW Instek GSP-9300?
The GSP-9300 covers 9 kHz to 3.0 GHz.
How do I calibrate the GSP-9300?
Calibration can be performed via the built-in calibration routine. Ensure the instrument has warmed up for 30 minutes. Access the calibration menu under System > Calibration.
What is the resolution bandwidth (RBW) range?
The RBW is adjustable from 10 Hz to 1 MHz in 1-3 step sequences.
Can the GSP-9300 measure AM/FM signals?
Yes, it supports AM and FM demodulation for analyzing modulated signals.
What is the input impedance?
The input impedance is 50 Ω, typical for RF spectrum analyzers.
How do I connect the GSP-9300 to a PC?
Use the USB or LAN interface. The USB port (type B) allows remote control via SCPI commands.
What safety precautions should be taken?
Avoid input signals exceeding +30 dBm (1 W) and use proper grounding. Refer to the manual for detailed safety instructions.
How do I clean the spectrum analyzer?
Use a soft, dry cloth to wipe the exterior. Do not use solvents or abrasive cleaners.
Is the GSP-9300 battery-powered?
No, it operates on AC power (100-240 V, 50/60 Hz). An optional battery is not available.
Where can I find spare parts or repair service?
Contact an authorized GW Instek service center for spare parts and repairs.
User questions about GSP-9300 GW Instek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual GSP-9300 - GW Instek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GSP-9300 by GW Instek.
USER MANUAL GSP-9300 GW Instek
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GW Instek
Model : GSP-9300
Category : Measuring equipment