eXplorist Pro 10 - GPS Navigator MAGELLAN - Free user manual and instructions
Find the device manual for free eXplorist Pro 10 MAGELLAN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Handheld GPS Navigator |
| Brand | Magellan |
| Model | eXplorist Pro 10 |
| Display | 3.5-inch color touchscreen (320x480 pixels) |
| Dimensions | 6.3 x 2.9 x 1.4 inches (160 x 74 x 35 mm) |
| Weight | 8.8 oz (250 g) with batteries |
| Power Source | 2 AA batteries (NiMH or alkaline) or rechargeable Li-ion pack |
| Battery Life | Up to 16 hours (AA alkaline, typical use) |
| Waterproof Rating | IPX7 (submersible up to 1 meter for 30 minutes) |
| Navigation | GPS+GLONASS, WAAS/EGNOS, HotFix |
| Maps | Preloaded Topo maps of North America (30K/100K) |
| Waypoints | Up to 200,000 waypoints |
| Routes | Up to 500 routes |
| Tracks | Up to 200 tracks (10,000 points each) |
| Memory | 4 GB internal, microSD card slot (up to 32 GB) |
| Connectivity | USB 2.0, NMEA 0183 output |
| Additional Sensors | Barometric altimeter, 3-axis electronic compass |
| Maintenance | Clean with dry cloth; avoid solvents; store in dry place |
| Safety | Do not disassemble; use only recommended batteries; avoid extreme temperatures |
| Spare Parts | Battery pack, USB cable, carabiner clip available from Magellan |
| Repairability | User-replaceable batteries and memory card; professional repair for other issues |
| General Information | Designed for outdoor enthusiasts; operates in -10°C to 60°C |
Frequently Asked Questions - eXplorist Pro 10 MAGELLAN
How do I turn on the Magellan eXplorist Pro 10?
Press and hold the power button located on the top edge of the device for about 2 seconds until the screen lights up.
What type of batteries does the eXplorist Pro 10 use?
It uses two AA batteries (alkaline or NiMH) or an optional rechargeable Li-ion battery pack.
Can I load custom maps onto this GPS?
Yes, you can add custom maps via the microSD card slot (up to 32 GB). Supported formats include .tpo and .rmp.
How do I mark a waypoint?
Press the Mark button (or icon) on the screen. The current location is saved; you can edit the name and symbol before confirming.
Is the device waterproof?
Yes, it has an IPX7 rating, meaning it can be submerged in up to 1 meter of water for 30 minutes.
How do I update the firmware?
Download the latest firmware from the Magellan website onto your computer, then connect the device via USB and copy the file to the GPS drive.
What is the battery life with typical use?
With two AA alkaline batteries, you can expect up to 16 hours of continuous use. Battery life varies with backlight and GPS usage.
Can I use the eXplorist Pro 10 while charging?
No, the device does not support charging while in use. You must turn it off to charge the internal battery pack. For AA batteries, they are simply replaced.
How do I reset the device?
To perform a soft reset, press and hold the power button for 10 seconds until the screen turns off. For a factory reset, go to Settings > Reset > Factory Defaults.
What maps come preloaded?
The device comes with Topo maps at 1:30K (high detail) and 1:100K (regional) scales for North America, including contour lines and points of interest.
User questions about eXplorist Pro 10 MAGELLAN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your GPS Navigator in PDF format for free! Find your manual eXplorist Pro 10 - MAGELLAN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. eXplorist Pro 10 by MAGELLAN.